9404 IBM AS/400 System Unit
Model CXX
IBM U.S. Product Life Cycle
Dates
Abstract
Highlights
Description
Models
·
Maximum
Publications
Features --
Specify/Special/Exchange
·
Special Feature
Codes -- Chargeable
Marketing Service Replaced
Type Model Announced Available Withdrawn Discontinued By
9404-C10 1990/02/06
1990/02/23 1991/12/03 2004/12/31 -
9404-C20 1990/02/06
1990/02/23 1991/12/03 2004/12/31 -
9404-C25 1990/02/06
1990/02/23 1991/12/03 2004/12/31 -
The IBM Application System/400* (AS/400*)
family consists of various processor models that offer a broad range of
processing power. These attractively packaged systems feature the latest
technology, superior quality and reliability, and improved price/performance.
This family supports a broad range of users with a single flexible,
high-function operating system, a wide offering of communications capabilities,
extensive connectivity, a rich office offering, strong integrated PC support,
and many unique programmer productivity tools. The AS/400 family is designed
for ease of operation with extensive menu prompts, and comprehensive help text
available. Also included is innovative electronic customer support which
provides automatic on-line problem determination and capability for direct
connection to IBM and user support data bases through the use of a modem. The
9404 System Unit is designed for a "quiet office" environment such as
a private office or library. The 9404 Models B20/C20/C25 and all of the D, E,
and F model System Units with the Expansion Unit (#7100, #7110, or #7120) are
acoustically designed to operate in a "general business" environment,
such as administrative, bookkeeping, word processing, and terminal areas.
(For IBM US, No Longer Available as of
December 3, 1991)
The Model C10 has a System Unit, 8 MB Main
Storage, 640 MB DASD.
(For IBM US, No Longer Available as of
December 3, 1991)
The Model C20 has a System Unit, 8 MB Main
Storage, 640 MB DASD.
(For IBM US, No Longer Available as of
December 3, 1991)
The Model C25 has a System Unit, 8 MB Main
Storage, 640 MB DASD.
Models C10, C20, and C25 come with two 3-1/2
inch direct access disk units standard, and can optionally add one or two
drives, either feature #6100 and/or #6105, for a storage capacity range from
640 MB to 1280 MB.
DASD dual disk unit features #6106 and #6108
are available on all 9404 C model systems. This increases the maximum DASD on
the C10 model to 1920 MB. An optional expansion unit, feature #7100, is
available for Models C20 and C25 for additional DASD expansion. DASD on the
Models C20 and C25 can be increased to a total of 3840 MB with the installation
of Additional Dual Disk Units (#6108), in all available optional DASD positions
in both the System Unit and the expansion unit. See feature #6108 for
prerequisites.
The 9404 System Units are the
mid-priced/mid-size members of the AS/400 family. The 9404 has a compact,
floor-standing package, that extends full AS/400 function to a broad range of
customers.
The small size and quiet operation of the
system unit allows it to be installed in a quiet office environment, such as a
private office or library. The 9404 Model B20/C20/C25 and all of the D, E, and
F model System Units with the Expansion Unit (#7100/#7110/#7120) are
acoustically designed to operate in a general business environment, such cs
administrative, bookkeeping, word processing, and terminal areas.
Customers who order the Operating System/400*
(OS/400*) with their original hardware order may elect to receive it preloaded
on the system unit. Refer to Operating System/400 (5738-SS1, 5763-SS1), for
disk storage requirements for OS/400 software.
The 9404 offers integrated twinaxial, ASCII,
and LocalTalk workstation controllers for attachment of a wide variety of
displays and printers. One Twinaxial Workstation Controller, ASCII Workstation
Controller, or Workstation Adapter (LocalTalk) must be specified as part of the
base 9404. Attachment to the IBM Token-Ring and Ethernet networks is provided
via optional adapters.
Electronic customer support included in the
Operating System/400 may be accessed for remote support, service, and
information, for improved customer productivity.
The Battery Power Unit feature is standard on
the 9404 E and F models and optional on the B, C and D model system. The
Battery Power Unit can improve the availability of the system by providing
power to the system unit for a minimum of five minutes during a power failure.
The 9404 System Unit is installed by IBM
service personnel. Model upgrades and installation of features are also
performed by IBM service personnel.
9404 Base System Unit Description
The base system unit is comprised of a
processor and main storage on the processor card, one internal I/O bus, disk
drive(s), one 1/4-inch cartridge tape unit, one Multi-Function I/O Processor, a
workstation controller, and one EIA 232/v.24 adapter and cable. The Battery
Backup Unit is included with the 9404 E and F model systems and is optional on
the other models. See the System Unit comparison table that follow for feature
ranges of each model.
The 9404 System Unit is designed to minimize
the physical space required for small and mid-range configurations, while
providing modular expansion.
A modem is required for electronic customer
support, but is not a component of the base system.
Processors
The system processor uses Very Large Scale
Integration (VLSI) logic and has a 32-bit data path and 48-bit addressing that
has the capability to provide direct access to 281 terabytes of storage. It is
implemented with a software and hardware architecture that can accommodate up
to 64-bit addressing. This architecture accommodates the needs of advanced
applications such as voice, image and artificial intelligence.
Automatic Operations
The 9404 provides the following automatic
operations.
Disk Units
Models C10, C20, and C25 come with two 3-1/2
inch direct access disk units standard, and can optionally add one or two
drives, either feature #6100 and/or #6105, for a storage capacity range from
640 MB to 1280 MB.
DASD dual disk unit features #6106 and #6108
are available on all 9404 B and C model systems. This increases the maximum
DASD on the B10 and C10 models to 1920 MB. An optional expansion unit, feature
#7100, is available for Models B20, C20, and C25 for additional DASD expansion.
DASD on the Models B20, C20, and C25 can be increased to a total of 3840 MB
with the installation of Additional Dual Disk Units (#6108), in all available
optional DASD positions in both the System Unit and the expansion unit. See
feature #6108 for prerequisites.
9404 System Unit model upgrades do not include
any changes to the base DASD devices.
Programs and data are stored on the disk for
processing. Data can be stored offline for security or backup purposes by
copying the data to tape or diskettes.
The specifications for each disk unit are:
Disk Unit Disk Unit Disk Unit
315 MB 320 MB 400 MB
Bytes/Sector: 512 Bytes 512 Bytes
512 Bytes
Bytes/Cylinder: 258,048 Bytes 337,389 Bytes
334,177 Bytes
Cylinders/Drive: 1223 cylinders 949 Cylinders 1199
Cylinders
Capacity/Drive: 315,592,704 Bytes 320,182,272 Bytes 400,678,912 Bytes
Avg Access
Time: 21.5 msec 12.5 msec 11.5 msec
Rotational
Speed: 3283 rpm 4316 rpm 4316 rpm
Instantaneous
Data Rate: 1.25 MBytes/sec 2
MBytes/sec 2 MBytes/sec
Disk Unit Disk Unit Disk Unit
988 MB 1.96 GB 1.03 GB
Bytes/Sector: 512 Bytes 512 Bytes
512 Bytes
Bytes/Cylinder: 482,110 Bytes 688,529 Bytes 248,069 Bytes
Cylinders/Drive: 2051 cylinders 2857 cylinders 4119
cylinders
Capacity/Drive: 988,807,680 Bytes 1967,128,576 Bytes 1031,798,784 Bytes
Avg Access
Time: 11.0 msec 9.5 msec 8.8 msec
Rotational
Speed: 4316 rpm 5400 rpm 5400 rpm
Instantaneous
Data Rate: 3MBytes/sec 5.22
MBytes/sec 5 or 6 MBytes/sec
(non-banded) (banded)
1/4-inch Cartridge Tape Units (base 9404
B/C/D/E/F Models)
The 1/4-inch cartridge tape drive is a low
cost, high-function, streaming tape drive used for save/restore, alternate IPL,
program distribution, migration, and 1/4-inch Cartridge tape interchange. An
optional 1.2 GB 1/4-inch cartridge tape unit feature, available on the 9404
Model D25 and on all 9404 E models, and standard on the 9404 F models, can
store up to 1.2 GB of data with an effective data rate of 300 KB per second
when operating in the 1.2 GB format with IBM 1.2 GB Data Cartridge media. The
525 MB tape unit, standard on the 9404 D and E models, can store up to 525 MB
of data with an effective data rate of 200 KB per second when operating in the
525 MB format with IBM 6525 Data Cartridge media. The 120 MB tape unit,
standard on the 9404 B and C models, and allowed on D model upgrades, can store
up to 120 MB of data with an effective data rate of 90KB per second when
operating in the 120 MB format with IBM 6150 Data Cartridge media. An optional
2.5 GB 1/4-Inch Cartridge Tape Unit is available on select D,E and F models.
The effective data rate and media capacity may
be increased approximately 1.4 times with Hardware Data Compression (HDC) for
save restore functions and is available on the D25 and all E and F models in
the Multi-Function I/O Processor and in the IOP in the #7110 or #7120 expansion
units.
Full interchange of data is supported with all
the standard and optional 1/4-inch cartridge tape units provided on the 9402,
9404, and 9406 models. Read only migration support is provided from the IBM
6157 Model 001 tape unit or the 5363 53MB internal tape drive (System/36
feature #2605) when written in the System/36 format.
9404 Multi-Function I/O Processor
The Multi-Function I/O Processor and one EIA
232/V.24 one-line communications adapter are standard features of the 9404
system unit. In addition to DASD, Diskette, and 1/4-inch cartridge tape unit,
the Multi-Function I/O Processor supports two communication lines.
The standard EIA 232/V.24 one-line adapter is
provided for use with the IBM electronic customer support facility on the first
communication line. This adapter is equipped with an enhanced cable that
provides attachment to an IBM 5853, 7855 or equivalent modem. The first line
supports switched line facilities operating at 2,400 bps or 9,600 bps using
SDLC protocol. Electronic customer support leased facilities may operate at
speeds up to 19,200 bps on the first line; 9,600 bps using the IBM 7855 modem.
A remote power-on capability designed so that
the system can be powered on via a telephone call to the IBM 5853 or 7855
electronic customer support modem is supported only on the first line. V.32
modems other than the IBM 7855 modem have not been tested and may not operate
with the remote power-on capability.
An EIA 232/V.24, X.21, or V.35 Adapter are
optional features that may be added to expand the capability to two lines. The
Multiple function I/O Processor supports ASYNC, BSC, SDLC, X.25 protocols and
the X.21 Short Hold Mode function with a maximum aggregate line speed of 21,600
bps (83,200 bps on the model D25 and E and F models).
Workstation Controllers
A maximum of three workstation controllers is
supported in the 9404 model B, C, and D System Units. One Twinaxial Workstation
Controller and one or two ASCII Workstation Controllers may be installed
concurrently. On the Model D25 only, one or two Twinaxial Workstation
Controllers and 1, 2, or 3 ASCII controllers for a maximum of three controllers
may be installed. This support is provided to allow the user to attach a
broader range of devices to a 9404 System Unit. In addition, each ASCII
Workstation Controller may have the optional ASCII 12-port Workstation
Attachment (#6142) feature.
A maximum of three workstation controllers is
supported in the Expansion Unit feature (#7100/#7110) on the 9404 Models B20,
C20, C25, D10, D20, and D25. One Twinaxial Workstation Controller (#6050/#6140)
and one or two ASCII Workstation Controllers (#6141) may be installed
concurrently. On the model D25 only, one or two Twinaxial Workstation
Controllers and one, two or three ASCII controllers for a maximum of three
controllers may be installed. In addition, each ASCII Workstation Controller
may have the optional ASCII 12-port Workstation Attachment (#6142) feature.
Security Keylock
The 9404 has a security keylock to prevent
unauthorized use of the system and unauthorized accessibility to data within
the system.
Uninterruptible Power Supply (UPS)
Interface
An interface is provided to attach a
vendor-supplied UPS which provides the ability to tolerate a large range of
power quality problems. Significant reduction in power requirements on the 9404
makes a UPS more cost effective.
Reliability, Availability and
Serviceability (RAS)
Problem determination is accomplished through
devices and features that, wherever possible, detect, isolate and report their
own errors. For cases when automatic recovery or isolation is not possible, a
process known as Problem Analysis and Resolution (PAR) is provided which
includes extended diagnostics for isolating the failure to a part or list of
parts. The failing unit may then be ordered and replaced on-site. The Analyze
Problem command will allow the customer to define perceived problems not
reported by the system.
When the failure has been analyzed and
isolated to a single part or parts, the communications facilities of the
electronic customer support can enable a direct link to IBM Service. This
results in a service representative being dispatched with the appropriate part
to resolve the problem.
9404 System Model Summary (C models)
Model Model Model
C10 C20 C25
----- ----- -----
Relative
System 1.3 1.8 2.2
Performance
Main Storage
Minimum (MB) 8 8 8
Maximum (MB) 20 32 40
System I/O
Bus
1 1-2 1-2
Card Slots 4 9 9
DASD Capacity
Base (MB) 640 640 640
Maximum (MB) 2400 4800 6400
Communications
Lines 1-8
1-14 1-14
LAN
Adapters
0-1 0-2 0-2
Workstation
Controllers
Minimum/Maximum 1/3 1/6 1/6
Twinaxial
Controllers
0-1 0-2 0-2
Twinaxial
Workstations
1-40 1-80 1-80
ASCII
Controllers
0-2 0-4 0-4
ASCII
Workstations
1-36 1-72 1-72
1/4-inch
Cartridge Tape 1 1-2 1-2
1/2-inch Reel
Tape
0-1 0-1 0-1
1/2-inch
Cartridge Tape
0-1 0-1 0-1
8mm Cartridge
Tape
0-2 0-4 0-4
Diskette (8 or 5
1/4-inch) 0-1 0-2
0-2
Tape
Libraries
0-1 0-2 0-2
Notes:
·
The relative system
performance ratios are estimated based on AS/400 environment, native RAMP-C
workload, with a 9404 B10 with 16 MB of main storage and 945 MB of DASD
equaling 1.0. The ratios shown were estimated at maximum configurations running
at 70% utilization. Relative system performance ratios may not be realized in
all environments.
Heading MainModel Storage DASD
----- ------- -------
C10 8 MB 640 MB
C20 8 MB 640 MB
C25 8 MB 640 MB
Maximum Communications Lines by Model
Max
2623
Total Total Max T1/E1/J1
Lines (3) + Max other
Comm Hi Spd < or = 2666 High
Speed
Model Lines Lines 384Kbps 512Kbps
640Kbps (2) Lines (1)
---------- -----
------ ------- ------- -------
----- --------
C10
8 2 0 0 0 0 2
C20/C25
14 2 0 0 0 0 2
Notes:
1. These are
X.21/V.35/ISDN lines which support BSC, X.25,
IDLC and SDLC at speeds greater than
19.2Kbps
up through 64Kbps. An ISDN adapter is
counted as two lines when determining the
number of lines supported.
2. This is the
combined number of #2666 and #2623
features supporting T1/E1/J1 speeds.
3. The Six-Line
Communications Controller (#2623)
supports up to three V.35 SDLC data lines
for
attachment to T1/E1/J1 facilities through
appropriate
Data Communications Equipment (DCE).
Per controller (#2623) support:
- One V.35 SDLC data line operating at
speeds up to 640Kbps
- Two V.35 SDLC data lines operating at
speeds up to 512Kbps
- Three V.35 SDLC data lines operating at
speeds up to 384Kbps
Not available.
4754 Security Interface Unit (SIU)
The 4754 Security Interface Unit (SIU) is an
optional device that attaches to the Cryptographic Processor features #2620 or
#2628. The 4754 provides the ability to communicate with the IBM Personal
Security Card for highly secure importation of cryptographic keys into the
Cryptographic Processor. The 4754 may also be used for initialization of the
Cryptographic Processor. The 4754 SIU has tamper-resistant packaging. Three IBM
Personal Security Cards are included with each 4754. The 4754 must be ordered
separately from the Cryptographic Processor feature.
Software support for the 4754 is provided by
OS/400 Version 2 Release 3 or later, and the IBM Common Cryptographic
Architecture Security Services/400 PRPQ (P84224 (5799-FBR)).
Optical Libraries
3995 Optical Library Dataserver
The 3995 Optical Library Dataserver Models
C40, C42, C44, C46 and C48, with direct attach capability, add a new level of
price, capacity and performance to the existing storage hierarchy of magnetic
disk, optical, and tape. The new models support 52GB, 135GB, 278GB, 405GB or
670GB of storage using the industry-standard 2.6GB multifunction optical drive.
Model C44 can be upgraded to a Model C46.
The new LAN-attached Models C20, C22, C24,
C26, and C28 support 52GB, 135GB, 278GB, 405GB, and 670GB of storage using the
2.6GB multifunction optical drive.
The 2.6GB drive has two-times the capacity of
existing drives and supports both rewritable and WORM optical disks. This new
drive also improves data transfer rate and reliability over the existing 1.3GB
optical drives.
These new 3995 models are ideally suited for
enabling applications to bring data currently stored on paper, microfiche, or
microfilm on-line. You can also use the 3995 as a low-cost complement to
high-performance magnetic disk to extend the online life of your data. The new
libraries will automate optical disk handling using the latest technology with
improvements in disk exchange time and reliability. The following OS/400
support is required:
·
For direct attached
models (C40/C42/C44/C46/C48)
o
OS/400 V3R2 with PRPQ
5799-XBW S/C 3520, and 5755-AS3 with feature #1979
o
OS/400 V3R6 with 5755-AS4
and features #1980 and #1986
o
OS/400 V3R7 and later
releases
Tape Units
3422 Magnetic Tape Subsystem (withdrawn
from marketing)
The 3422 is a 1/2-inch reel-to-reel
intermediate performance tape subsystem. The 3422 reads or writes data at 6,250
bpi at a nominal data rate of 780KB per second or 1,600 bpi at a nominal data
rate of 200KB per second. It is a start/stop drive and is provided for
alternate IPL, program distribution, and 1/2-inch reel tape interchange.
The 3422 consists of a Model A01 with a tape
controller and one tape drive and a Model B01 with one tape drive and no
controller. A maximum of three B01s can be attached to a Model A01 for a total
of four drives per string. The 3422 attaches to the 9404 via the 3490 Magnetic
Tape Subsystem Attachment (#2644).
The 3422 Tape drive supports 1.5 mil thick
tape media up to a maximum of 2400 feet. Maximum: See the 9404 System Model
Summary table.
3430 Magnetic Tape Subsystem (withdrawn
from marketing)
The 3430 is a 1/2-inch reel-to-reel medium
performance tape subsystem. The 3430 reads or writes data at 6,250 bpi at a
nominal data rate of 312KB per second or 1,600 bpi at a nominal data rate of
80KB per second. It is a start/stop drive and is provided for alternate IPL,
program distribution, and 1/2-inch reel tape interchange.
The 3430 consists of a Model A01 with a tape
controller and one tape drive and a Model B01 with one tape drive and no
controller. A maximum of three B01s can be attached to a Model A01 for a total
of four drives per string. The 3430 attaches to the 9404 via the 3490 Magnetic
Tape Subsystem Attachment (#2644).
The 3430 Tape drive supports 1.5 mil thick
tape media up to a maximum of 2400 feet. Maximum: See the 9404 System Model
Summary table.
3480 Magnetic Tape Subsystem
The 3480 is a 1/2-inch cartridge high
performance tape subsystem with a capacity of up to 200MB per Cartridge System
Tape. The 3480 reads and writes at an instantaneous data rate of 3MB per
second. It is provided for program distribution, alternate IPL, save/restore,
and 1/2-inch cartridge tape interchange. The Improved Data Recording Capability
(IDRC) feature of the 3480, which is supported by OS/400 Version 2 Release 1,
can increase the amount of data that can be stored on a cartridge by up to
three times, depending on the data. The 3480 Magnetic Tape Subsystem provides
concurrent operations when attached to more than one host system.
One 3480 A11 control unit and up to eight B11
tape drives or one A22 control unit and up to eight B22 tape drives attach to
the 9404 via the 3490 Magnetic Tape Subsystem Attachment (feature #2622
available by RPQ 841975). the 3490 Magnetic Tape Subsystem Attachment/HP
(#2644). OS/400 Version 2 Release 1.1 is required for feature #2644. Maximum:
See the 9404 System Model Summary table.
3490/3490E Magnetic Tape Subsystem Models
AXX-DXX
The 3490/3490E is a high performance 1/2-inch
cartridge tape subsystem with a range of models that read and write at an
instantaneous data rate of up to 3MB per second when attached with feature
#2644. The 3490 models use the Cartridge System Tape media, providing up to 200
MB per cartridge. The 3490E models use either the Cartridge System Tape media
with up to 400MB per cartridge or the Enhanced Capacity Cartridge System Tape
media with up to 800MB per cartridge. The models are differentiated as follows:
The 3490 and 3490E models are provided for
program distribution, alternate IPL, save/restore, and 1/2-inch cartridge tape
interchange. The 3490 Magnetic Tape Subsystem provides concurrent operations
when attached to more than one host system.
The 3490 and 3490E models are floor standing
units except the 3490E C10, C11, and C22 which are functionally equivalent to
the 3490E D41 and D42 but mount into a system rack. The C models must be
installed in one of the following rack enclosures:
3490E feature #5037, Parallel Channel
Attachment, is a prerequisite on Models C10, C11, and C22 for attachment to the
AS400 Advanced Systems.
The Automatic Cartridge Loader (ACL) feature
accepts six 1/2-inch tape cartridges, five in the ACL and one in the drive. It
is standard on the BXX, C11 and C22 models, a feature on the DXX models and not
supported on the C10.
The Improved Data Recording Capability (IDRC)
can increase the amount of data that can be stored on a cartridge by up to
three times, depending on the data. It is standard on the 3490E models and a
feature on the 3490 models.
Maximum unattended save capacities per drive
are as follows:
This results in up to 28.8GB unattended save
capacity on a 3490E Model C22.
Following are the 3490 and 3490E Control Unit
Models which attach to the above features:
The following models can attach to the 3490
A01 or A02 Control Unit Models:
The following models can attach to the 3490E
A10 or A20 Control Unit Models:
The 3490 Magnetic Tape Subsystems can be
shared between AS/400 systems, System/370 and System/390 as follows:
3490E Magnetic Tape Subsystem Models E01
and E11
The 3490E E01 and E11 models are media
compatible with the current 3490E models, but offer a lower cost, smaller size,
increased performance, and increased Cartridge Stack Loader (CSL) capacity. The
new models include rack-mount and table-top versions, both with a seven
cartridge CSL. Each model has an integrated control unit and one tape drive.
Data compaction with Improved Data Recording Capability (IDRC) provides up to
three times compaction. With IDRC, data transfer rates up to 4.9MB/sec are
obtained. Unattended save capacity up to 16.8GB is provided. One or two 3490E E
models are supported using #6501.
The 3490E EXX models cannot be shared between
two systems, and distance from the system is limited to 82 feet (25 meters).
The 3490E CXX models should be selected when system sharing is required, and/or
distance up to 400 feet (121 meters) is required. Also, the 3490E EXX models
cannot be migrated to the Magstar 3494 Tape Library Model L10, while the 3490E
CXX models can.
Maximum: See AS/400 Model Summary tables.
3490E Tape Drive Models F00, F01 and F11
Model F00 is a single drive. Model F01 is
floor-standing and the F11 is rack-mounted, both with a standard 10 cartridge
autoloader. Each model reads and writes 36-track tape cartridges, and reads
18-track 1/2-inch tape cartridges. Native performance is 3MB/s. IDRC data
compaction is provided. OS/400 V3R1, or later, is required.
Maximums: See AS/400 Model Summary tables.
Magstar 3494 Tape Library
The Magstar 3494 Tape Library Model L10 is
stand-alone, automated tape-storage subsystem designed to provide unattended
tape operation.
The 3494 Tape Library Dataserver Models L12
and L14 offer the high reliability and high availability features of the Model
L10 with the added support of the 3590 High Performance Tape Subsystem Model
B1A. This allows customers to automate tape data handling with the latest
technology. The ability to support the 3490E and 3590 technology in the same
library offers customers a fast and convenient way to manage these tape medias.
Using Backup Recovery and Media Services/400
(5763-BR1) Version 3 Release 1 or later, the 3494 provides automated system
backup and recovery. Use of this product along with an IBM Services Offering is
optional, but recommended.
3494 Highlights:
The 3490E-CXA and 3590-B1A tape drives within
the library attach to the AS/400 in the same way as the 3490E-CXX and 3490 B1A
tape drives. On the AS/400, one EIA 232/V.24 Line Adapter or a LAN attachment
is required for each 3494 Tape Library.
Maximums: See AS/400 Model Summary tables.
3590 High Performance Tape Subsystem
The 3590 is a new automated tape subsystem for
the AS/400, reaching higher levels of reliability, capacity and performance.
The drive rate of 9 MB per second is three times faster than previous IBM 3480,
3490 or 3490E tape drives, allowing tape applications to read and write data
more quickly. Using the built-in data compression capability, the 3590 has a
potential maximum throughput of 20 MB per second. Actual throughput is a
function of end-to-end system capabilities including processor, DASD, bus, IOP,
OS/400 blocking and data compaction.
The 3590 uses new read/write and media
technology for vastly increased capacity and reliability. The new cartridge has
an uncompacted data capacity of 10 GB, or typically over 30 GB assuming a 3:1
compaction ratio. The capacity of an individual drive has further been
increased by the addition of the Automatic Cartridge Facility (ACF), which
allows an operator to mount ten cartridges at a time via a magazine. Thus an
individual drive can provide storage for 100 to 300 GB of data. The 3590 cannot
read or write 3490E tape cartridges.
The 3590 is available in two models. The Model
B11 is rack mounted and includes a 10-cartridge Automatic Cartridge Facility
(ACF) that can be used in random access mode as a mini-library. The Model B1A
does not include the ACF and is designed to fit into the 3494 Tape Library
Dataserver, increasing total library capacity to over 90 terabytes.
The 3590 attaches to all AS/400 DXX and later
models, except the X02 and P03 models, using AS/400 Feature #6501 (Magnetic
Media Subsystem Controller). Each feature #6501 can support up to two tape
drives. The 3490 has two SCSI ports and can be shared between two systems.
Backup Recovery and Media Services/400
(BRMS/400) is recommended to support automation in tape handling, media
management, fast search, and automatic migration of data between tape and DASD
based on user defined policies. For developing unique applications, OS/400 provides
a command interface.
7208 8-mm External Tape Drives
The 7208 is an 8-mm helical scan, medium
performance, high capacity, streaming tape drive with models supporting media
capacity of up to 7.0GB per cartridge. The Model 2 (Withdrawn from marketing) provides
2.3GB capacity. When hardware data compression (HDC) on the IOP is enabled, it
typically provides 1.5 times improvement in capacity and transfer rate. The
7208 Model 12 provides 5GB capacity and the Model 222 provides 7GB. Both Models
12 and 222 support an implementation of IBM's Improved Data Recording
Capability (IDRC) that typically provides a two times improvement in capacity
and transfer rate.
Both 7208 models are stand-alone, table-top
devices, and can be used for save/restore, alternate IPL, program interchange
and 8mm cartridge tape interchange with other AS/400 systems. Kits for
rack-mounting are available via RPQ 841997 for the Model 2 and RPQ 841998 for
the Model 12. The 7208 attaches to the AS/400 via Removable Media Device
Attachment Feature (#2621). This feature supports up to two tape devices.
Full interchange of data is supported between
Models 002, 012 and 222, the 9427 and the AS/400 Advanced Series internal 7GB
8mm tape units, using the proper tape density and 7208-002/012/222 tape media.
All models use the same media and cleaning cartridges. The Models 002, 012 and
222 do NOT support data interchange with the 7208 Model 1 or Model 11 attached
to RS/6000 systems.
The Model 2 has an instantaneous data transfer
rate of 245KBps second. When HDC is enabled the unattended save rate would
typically be 1GB/Hr with 3.5GB of data stored per cartridge. The Model 12 has
an instantaneous data transfer rate of 500KBps. When IDRC is enabled the
unattended save rate would typically be 3GB/Hr with 10GB of data stored per
cartridge. The Model 222 has a sustained data transfer rate of 500KBps. Using
IDRC, maximum effective data transfer rate is up to 1MBps, and capacity is up
to 14GB of data stored per cartridge, depending on the type of data.
Attaches to all AS/400 Advanced Series models.
Model 222 requires the support of OS/400 Version 3 Release 1. Maximums: See
System Unit Summary table.
9348 Model 2 Magnetic Tape Unit
The 9348 Model 2 is a free standing table top,
streaming 1/2-inch reel-to-reel tape drive. It is provided for save/restore,
program distribution and 1/2-inch reel tape interchange. The 9348 Model 2 can
be used for alternate IPL when attached to 9404 Models D25, E10, E20, E25, F10,
F20, and F25.
The 9348 is a dual density 1,600/6250 bpi
drive with an instantaneous data rate of 200KB per second at 1,600 bpi and
781KB per second at 6,250 bpi.
The 9348 Model 2 attaches to the 9404 via the
following features:
The 9348 Model 2 Magnetic Tape Unit includes
an attachment cable and terminator. Specify cable length as follows:
9427 8mm Tape Cartridge Library Models 210
and 211
The 9427 Models 210 and 211 are automated tape
libraries supported on all AS/400 D, E and F models (except Models D02 and
E02), and on all AS/400 Advanced Series models. The 9427-210 is a stand-alone
unit, and the 9427-211 is a rack-mounted unit that requires 14 EIA units and
1/2 of the horizontal rack space. Two Model 211 units can be placed in a rack,
side-by-side. Each 9427 supports one or two 7GB 8mm tape drives. Up to twenty
tape cartridges are supported. Optional features to support dual host channels,
tape mirroring for fault tolerance, off-line host independent functions (tape
copy and compare), and a label printer port will be available. Device
performance is 1.5MB/sec. The 9427 is available in black or white.
Tape cartridge capacity is 7GB and sustained
data transfer rate is 500KBps. Using Improved Data Recording Capability (IDRC),
maximum tape cartridge capacity is up to 14GB, and effective data transfer rate
is up to 1MBps, depending on the type of data. Total 9427 capacity is up to
280GB.
The 9427 can be used for save/restore,
alternate IPL (except on Models D04, D06, D10 and D20), program distribution,
migration, data interchange, automatic migration of data between DASD and tape,
and mass storage for data archive. Full interchange of data is supported with
the 7208-002, 7208-012 and 7208-232 tape drives, and the AS/400 Advanced Series
internal 7GB 8mm tape units, using the proper tape density and 7208-002/012
tape media.
Media is handled in two, ten-cartridge magazines,
which can easily be added to or removed from the tape library. Each library has
a bar-code reader used to inventory the library contents, and a display on the
front panel that is used for status and error codes. Keys located next to the
display are used for selecting operating options. The 9427 has a front door of
clear plastic so that the robotics, drives and cartridge tapes can be seen
while in operation. The door has a key-lock for security.
Neither the 7GB 8mm Cartridge Tape unit
located in the AS/400 system unit, nor the 7208-222, can be migrated to a 9427.
The 9427 is attached to the AS/400 via the
Removable Media Device Attachment (#2621), with a maximum of one 9427 per
#2621. The Removable Media Device Attachment (#2621) has two SCSI ports. The
9427 can attach to the #2621 using one or two ports (two ports are required for
maximum performance of the 9427). If the 9427 is attached using only one SCSI
port, then the other SCSI port can be used to attach other devices. A feature
is available to support attachment to two systems with random access to
cartridges, tape mirroring, offline tape copy and compare, and a label printer
port.
Support for the 9427 is provided by OS/400
Version 3 Release 1. Backup, Recovery and Media Services/400 (5763-BR1) is
recommended to support automation in tape handling, media management, and
automatic migration of data between tape and DASD based on user defined
policies. For those developing unique library applications, OS/400 provides a
library command interface.
Remote Workstation Controllers
5251 Model 12
The 5251 Model 12 may be used to attach remote
workstations. It is a workstation controller and communications unit for remote
attachment of multiple display stations and printers. PC Support access by Personal
Computers and Personal System/2s attached to the 5251 Model 12 will not be
supported.
Note: Remote workstation controllers attach to the AS/400 via the
communications subsystem features. The 5294 or the 5394 running in 5294
emulation mode, will not give IBM Personal Computers or Personal System/2s
access to IBM PC Support/400.
5294
The 5294 Remote Control Unit can be used to
attach up to eight 5250 type displays, printers, IBM Personal Computers and
Personal System/2s, and Personal System/55 (AP only), to an AS/400 via a
communications link. The function provided will be equivalent to that available
on the System/36 and System/38 with the exception that PC Support access by
Personal Computers and Personal System/2s attached to the 5294 will not be supported.
5394
The 5394 Remote Control Unit attaches up to
sixteen 5250 type displays, printers, IBM Personal Computers and Personal
System/2s, and Personal System/55 (AP only) to an AS/400 via a communications
link. The function provided will be similar to that provided to the local
workstations via the #6140 or #6040 local twinaxial workstation controllers.
5494 Remote Control Unit
The 5494 Remote Control Unit manages the
operation of workstations and workstation communications to the AS/400. The IBM
5494-EXT replaces the IBM 5494-001 and the IBM 5494-002. The 5494 now has only
one model, to which features are added customizing the 5494 for operational
needs.
The 5494-EXT supports the attachment of up to
28 twinaxial devices. With the 5494 Twinaxial Expansion Kit installed, up to 56
twinaxial devices can communicate to the AS/400 through a Type 2.1 connection.
By installing the 5494 Token-Ring Adapter, the
5494-EXT has all the functional capabilities of the withdrawn 5494-002. It can
communicate with an AS/400 system over a Token-Ring network while supporting up
to 28 twinaxial devices, or can support Token-Ring attached devices while
communicating with an AS/400 over an SDLC, X.21, or X.25 connection. In this
configuration, the 5494 supports up to 80 devices of which up to 28 could be
twinaxial attached and the rest Token-Ring attached.
The Ethernet Adapter supports IEEE 802.2
logical link control and IEEE 802.3 or DIX Version 2.0 frame format using a
10BASE2 (BNC), a 10BASE5 (15-pin D-SUB), or a 10BASE-T (RJ-45) connector. The
5494 Ethernet AUI Cable allows the attachment to an Ethernet Network using
thick coaxial (10BASE5) cabling. Ethernet support allows the 5494 to be used as
a gateway to an Ethernet LAN or attach to an AS/400 System via an Ethernet
Network.
The 5494 Utility Program allows the selection
of Concurrent Diagnostics, configuration information, or to reset and restart
the 5494 Remote Control Unit from a remote Programmable Workstation (PWS). The
PWS no longer needs to be directly attached to a 5494 to provide access to
remote 5494's from a central site.
The IBM 5494 Release 3.0 microcode supports
all the functions of the IBM 5494 Release 2.0 microcode and the following
enhancements:
·
Support of OS/400 Version
3 Release 1.
Multiconnectors
5299 Multiconnector and TTPA Adapter
The 5299 Multiconnector and Twinaxial to
Telephone Twisted Pair Adapter (TTPA) may be used with appropriate telephone
wiring. Initial and ongoing site cabling costs may be reduced with this wiring
option.
Workstation Support
Twinaxial Displays
The following displays are supported by the
Twinaxial Workstation Controller (#6140, #6040, and #6050):
ASCII Displays
The following ASCII displays, are supported by
the ASCII Workstation Controller (#6141 and #6041):
The 3151, 316X, or equivalent attached to the
ASCII Workstation Controller are supported as the AS/400 system console. See
the "ASCII Workstation Reference and Example" manual SA41-9922, for
specific configuration information.
The following non-IBM displays have been
tested and found to work with the ASCII Workstation Controller:
·
TeleVideo 910, 925, 955
(2)
LAN Attached Displays
6250 X Terminal Family
The IBM 6250 X Terminal offers
high-performance, local-area network (LAN)-attached X terminals that provide a
low-cost, desk-top platform for connectivity to the AS/400 and UNIX based host
platforms (such as the RS/6000*. The 6250 X Terminal supports multiple 5250
emulation sessions to one or more AS/400s using an X Windows interface. The X
terminal can also access UNIX host applications using either the memory
efficient 6250 Window manger or the industry standard Motif** Window Manager.
Either window manager provides a superb graphics platform for applications in
the X Window environment.
The 6250 X Terminal Family includes four
models...color and monochrome Ethernet models and color and monochrome
Token-Ring models. They come with a base of 4MB of memory, expandable to 20MB
or 16MB, depending on the model. The displays both have a resolution of 1024X768
and the color models support 256 colors.
The 6250 X Terminal requires one AS/400 on the
LAN to have the IBM 6250 X Terminal Program for OS/400 (PRPQ 5799-QGP)
installed. The X terminal down-loads the X window environment from the AS/400
and then can communicate with other hosts on the LAN.
The X terminals include an integrated, swivel
display, keyboard, three button mouse and license to use the 6250 program. The
X terminals have an easy to use setup menu for initial configuration and
standard LAN connectors for the most popular Ethernet or Token-Ring
connections.
IBM Personal Computer Support
The AS/400 supports the IBM Personal Computer,
Models 5150, 5160, 5162 and 5170, as described in programming announcement
letters dated February 3, 1987 and January 26, 1988.
Personal System/2 Support
The AS/400 supports the IBM Personal System/2
models and the IBM Personal Typing System. For information regarding attachment
of specific Personal System/2 models refer to the model Sales Manual
description under "List of Supported Products" for AS/400 attachment
hardware and under "IBM Software Compatibility" for supported AS/400
software.
The IBM Personal Computer and the Personal
System/2, when attached to the Twinaxial Workstation Controller, are supported
for use as a system console and specific IBM Personal Computer printers are
supported as system printers.
Printer Support
Twinaxial Printers
The following printers are supported by the
Twinaxial Workstation Controller. Those which are DBCS (Double Byte Character
Set) font capable are listed in the subsequent section.
Laser Printers
(Includes all electrophotographic print technologies)
Device Max.Type Model Speed Datastream Forms
------ ----- ------- ---------- --------
3812 001* 12 ppm SCS,IPDS Cut
002* 12 ppm SCS,IPDS Cut
3816 01S* 16 ppm SCS,IPDS Cut
01D* 16 ppm SCS,IPDS Cut
3912 AS0 12 ppm SCS Cut
AS1 12 ppm SCS,IPDS Cut
3916 AS0 16 ppm SCS Cut
AS1 16 ppm SCS,IPDS Cut
3930 02S 30 ppm IPDS Cut
02D 30 ppm IPDS Cut
3935 001 35 ppm IPDS Cut
4028 AS1 10 ppm IPDS Cut
* Withdrawn from marketing
Impact Printers
Device Max.Type Model Speed Datastream Forms
------ ----- ------- ---------- --------
4210 001* 200 cps SCS Cont
4214 002* 200 cps SCS Cont
4224 101 200 cps IPDS Cont
102 400 cps IPDS Cont
1C2 400 cps IPDS Cont
1E2 400 cps IPDS Cont
1E3 600 cps IPDS Cont
4230 101 375 cps SCS Cont/Cut
1S2 480 cps SCS Cont/Cut
4S3 600 cps SCS Cont/Cut
1I1 375 cps IPDS Cont/Cut
102 480 cps IPDS Cont/Cut
4I3 600 cps IPDS Cont/Cut
4234 002* 410 lpm SCS Cont
008* 410 lpm IPDS Cont
012* 800 lpm IPDS Cont
4245 T12* 1200 lpm SCS Cont
T20* 2000 lpm SCS Cont
4247 001 700 cps SCS Cont/Cut
4247 001 700 cps IPDS Cont/Cut
4247 002 400 cps SCS Cont/Cut
4247 002 400 cps IPDS Cont/Cut
5219 D01* 40 cps SCS Cont/Cut
D02* 60 cps SCS Cont/Cut
5224 001* 140 lpm SCS Cont
002* 240 lpm SCS Cont
5225 001* 280 lpm SCS Cont
002* 400 lpm SCS Cont
003* 490 lpm SCS Cont
004* 560 lpm SCS Cont
5256 001* 40 cps SCS Cont
002* 80 cps SCS Cont
003* 120 cps SCS Cont
5262 001* 650 lpm SCS Cont
6252 T08 800 lpm SCS Cont
T12 1200 lpm SCS Cont
6262 T12 1200 lpm SCS Cont
T14 1400 lpm SCS Cont
T22 2200 lpm SCS Cont
6400 AllModels SCS,IPDS Cont
6408 CT0 800 lpm SCS Cont
CTA 800 lpm SCS,IPDS Cont
6412 CT0 1200 lpm SCS Cont
CTA 1200 lpm SCS,IPDS Cont
* Withdrawn from marketing
Key to Abbreviations
·
Maximum Speed
cps
characters per second
lpm
lines per minute
ppm
SCS
SNA Character Set
IPDS
Intelligent Printer Data Stream
Cut
Cut-sheet forms
Cont
Continuous forms
DBCS Printers
The following printers support DBCS (Double
Byte Character Set) fonts:
Twinaxial Attached
IBM Personal Printers
The following IBM Personal Printers are
supported by the attachments indicated in the following table. Refer to
"Attaching IBM Personal Printers to IBM Systems" (S544-4209) for
attachment information. Also refer to the specific emulator product
documentation for attachment information.
Device Attachment
Printer Type Model Keys
------- ------ ----- -------------------
IBM Personal Series II/Plus 2380 - 1 2 3 4 5 6 7 8 12
IBM Personal Series II/Plus 2381 - 1 2 3 4 5 6 7 8 12
IBM Personal Series II/Plus 2390 - 1 2 3 4 5 6 7 8 12
IBM Personal Series II/Plus 2391 - 1 2 3 4 5 6 7 8 12
IBM 3812 Pageprinter 3812 1 2 3 6 7 12
IBM 3812 Pageprinter 3812 2 2 3 6 7 12
IBM 3816 Pageprinter 3816 01S 2 3
IBM 3816 Pageprinter 3816 01D 2 3
IBM 3912 Page Printer 3912 AS0 2 3 4 7 12
IBM 3912 Page Printer 3912 AS1 2 3 4 7 12
IBM 3916 Page Printer 3916 AS0 2 3 4 7 12
IBM 3916 Page Printer 3916 AS1 2 3 4 7 12
IBM 3930 Printer 3930 03S 1 2 3 12
IBM 3930 Printer 3930 03D 1 2 3 12
IBM LaserPrinter 4019 1 1 2 3 4 5 6 7 8 12
IBM LaserPrinter E 4019 E01 1 2 3 4 5 6 7 8 12
IBM LaserPrinter 5E 4029 10 1 2 3 4 5 6 7 8 12
IBM LaserPrinter 6 4029 20 1 2 3 4 5 6 7 8 12
IBM LaserPrinter 10 4029 30 1 2 3 4 5 6 7 8 12
IBM LaserPrinter 10E 4029 40 1 2 3 4 5 6 7 8 12
IBM 4037 5E Printer 4037 - 1 2 3 4 7 10 11 12
IBM LaserPrinter 4039 10R 2 3 4 7 12
IBM LaserPrinter 4039 12R 2 3 4 7 12
IBM LaserPrinter 4039 12L 2 3 4 7 12
IBM LaserPrinter 4039 16L 2 3 4 7 12
IBM 4070 Printer 4070 - 1 2 3 4 5 6 7 8 12
IBM ExecJet 4072 - 1 2 3 4 5 6 7 8 12
IBM ExecJet II 4076 - 1 2 3 4 7 10 11 12
IBM Proprinter 4201 1 2 3 4 5 6 7 8 9 12
IBM Proprinter II 4201 2 1 2 3 4 5 6 7 8 9 12
IBM Proprinter III 4201 3 1 2 3 4 5 6 7 8 9 12
IBM Proprinter XL 4202 1 1 2 3 4 5 6 7 8 9 12
IBM Proprinter II XL 4202 2 1 2 3 4 5 6 7 8 9 12
IBM Proprinter III XL 4202 3 1 2 3 4 5 6 7 8 9 12
IBM Proprinter X24 4207 1 1 2 3 6 7 8 9 12
IBM Proprinter X24E 4207 2 1 2 3 4 5 6 7 8 9 12
IBM Proprinter XL24 4208 1 1 2 3 6 7 8 9 12
IBM Proprinter XL24E 4208 2 1 2 3 4 5 6 7 8 9 12
IBM Proprinter 24P 4212 - 2 3 4 5 6 7 8 12
IBM Personal Pageprinter 4216 10 1 2 3 4 5 6 12
IBM 4224 Printer 4224 301 1 12
IBM 4224 Printer 4224 302 1 12
IBM 4224 Printer 4224 3E3 1 12
IBM 4226 Printer 4226 302 1 2 3 4 5 6 7 12
IBM 4230 Printer 4232 4S3 1 2 3 4 5 12
IBM 4230 Printer 4232 4I3 1 2 3 4 5 12
IBM 4232 Printer 4232 302 1 2 3 4 5 12
IBM 4234 Printer 4234 9 1 12
IBM 4234 Printer 4234 13 1 12
IBM 4770 Ink Jet Printer 4770 - 12
IBM Quietwriter 5201 1 2 3 4 5 6 7 8 12
IBM Quietwriter 5201 2 2 3 4 5 6 7 8 9 12
IBM Quietwriter III 5202 - 2 3 4 5 6 7 8 9 12
IBM Quickwriter 5204 - 1 2 3 4 5 6 7 8 9 12
IBM Serial Matrix Printer 4247 A00
IBM Impactwriter 6252 AS8 1 9 12
IBM Impactwriter 6252 AS2 1 9 12
IBM 6400 Printer 6400 All Models 1 2 3 12IBM 6408 Printer 6408 A00 1 2 3 12
IBM 6408 Printer 6408 CTA 1 2 3 12
IBM 6412 Printer 6412 A00 1 2 3 12
IBM 6412 Printer 6412 CTA 1 2 3 12
Attachment Keys:
1.
Attachment
via the AS/400 ASCII Workstation Controller
2.
Attachment
via a PC or PS/2 utilizing AS/400 PC Support Workstation Function (DOS)
3.
Attachment
via a PC or PS/2 utilizing IBM OS/2 Extended Edition Version 1.3, or later
4.
Attachment
via the 3477 InfoWindow display or 3486/3487/3488 InfoWindow II displays
5.
Attachment
via the 3197 Display station
6.
Attachment
via a PS/2 utilizing the S36/38 Workstation Emulation Program
7.
Attachment
via a PC or PS/2 utilizing the Enhanced 5250 Emulation Program
8.
Attachment
via a PC or PS/2 utilizing the Remote 5250 Emulation Program
9.
Attachment
via the 5208 Model 1 ASCII-5250 Link Protocol Converter
10. Attachment via Rumba/400
11. Attachment via IBM OS/2
Communications Manager/2
12. Attachment via OS/400 Host Print
Transform function
Non-IBM Personal Printers
The following Non-IBM Personal Printers are
supported by the attachments indicated in the following table. Refer to
"Attaching IBM Personal Printers to IBM Systems" (S544-4209) for
attachment information. Also refer to the specific emulator product
documentation for attachment information.
AttachmentPrinter Keys
------- ----------
COMPAQ PageMark 15 2 12 COMPAQ PageMark 20 2 12 HP DeskJet 500 2 12 HP DeskJet 520 12 HP DeskJet 550C 2 12 HP DeskJet 560C 12 HP LaserJet Series II 2 12 HP LaserJet IID 2 12HP LaserJet IIP 2 12
HP LaserJet III 2 12 HP LaserJet IIID 2 12 HP LaserJet IIIP 2 12 HP LaserJet IIISi 2 12HP LaserJet 4 12
HP PaintJet 12 HP PaintJet XL 12 HP PaintJet XL300 12 Epson ActionPrinter 2250 2 12 Epson ActionPrinter 3250 2 12 Epson ActionPrinter 5000 2 12 Epson ActionPrinter 5500 2 12 Epson DFX-5000 2 12 Epson DFX-8000 2 12 Epson EPL-7000 2 12Epson EPL-8000 2 12
Epson FX-850 2 12 Epson FX-870 2 12 Epson FX-1170 2 12 Epson LQ-510 2 12 Epson LQ-570 2 12 Epson LQ-860 2 12 Epson LQ-870 2 12 Epson LQ-1070 2 12 Epson LQ-1170 2 12 Epson LQ-2550 2 12Epson LX-810 2 12
Epson SQ-870 2 12 Epson SQ-1170 2 12 NEC P2 Pinwriter 2 12 NEC P2200 Pinwriter 2 12NEC P2200 XE Pinwriter 2 12
NEC P5200 Pinwriter 2 12 NEC P5300 Pinwriter 2 12 NEC P6200 Pinwriter 2 12 NEC P6300 Pinwriter 2 12 Okidata Microline 184 Turbo 2 12 Okidata Microline 320 2 12 Okidata Microline 321 2 12 Okidata Microline 390 Plus 2 12 Okidata Microline 391 Plus 2 12 Okidata Microline 393 Plus 2 12 Okidata Microline 590 2 12 Okidata Microline 591 2 12 Okidata OL400 LED Page Printer 2 12 Okidata OL800 LED Page Printer 2 12 Okidata OL810 LED Page Printer 2 12Okidata OL820 LED Page Printer 2 12
Okidata Pacemark 3410 2 12 Panasonic KX-P1123 2 12 Panasonic KX-P1124 2 12 Panasonic KX-P1124i 2 12 Panasonic KX-P1180 2 12 Panasonic KX-P1180i 2 12 Panasonic KX-P1191 2 12 Panasonic KX-P1624 2 12 Panasonic KX-P1654 2 12 Panasonic KX-P1695 2 12 Panasonic KX-P2123 2 12 Panasonic KX-P2124 2 12 Panasonic KX-P2180 2 12 Panasonic KX-P2624 2 12 Panasonic KX-P4410 2 12Panasonic KX-P4420 2 12
Panasonic KX-P4430 2 12 Panasonic KX-P4450i 2 12 Panasonic KX-P4451 2 12 Xerox 4215/MRP 12 Xerox 4219/MRP 12 Xerox 4220/MRP 12 Xerox 4235 Laser Printer 12 Xerox 4700 II Color Document Printer 12
Attachment Keys:
1.
Attachment
via the AS/400 ASCII Workstation Controller
2.
Attachment
via a PC or PS/2 utilizing AS/400 PC Support Workstation Function (DOS)
3.
Attachment
via a PC or PS/2 utilizing IBM OS/2 Extended Edition Version 1.3, or later
4.
Attachment
via the 3477 InfoWindow display or 3486/3487/3488 InfoWindow II displays
5.
Attachment
via the 3197 Display station
6.
Attachment
via a PS/2 utilizing the S36/38 Workstation Emulation Program
7.
Attachment
via a PC or PS/2 utilizing the Enhanced 5250 Emulation Program
8.
Attachment
via a PC or PS/2 utilizing the Remote 5250 Emulation Program
9.
Attachment
via the 5208 Model 1 ASCII-5250 Link Protocol Converter
10. Attachment via Rumba/400
11. Attachment via IBM OS/2
Communications Manager/2
12. Attachment via OS/400 Host Print
Transform function
LAN-attached ASCII Printers
IBM and non-IBM ASCII printers can be attached
directly to the AS/400 via a LAN connection using the IBM 4033 LAN connection
product. Ethernet and Token-ring connections are supported. The ASCII printers
that are supported thru this attachment method are the same printers supported
using the OS/400 Host Print Transform function. Refer to the previous charts
for a list of IBM and non-IBM ASCII printers supported with the Host Print
Transform function.
The IBM 4039 LaserPrinter can also be attached
directly to the AS/400 via a LAN network connection using the 4039 integrated
network adapter option.
LAN-attached IPDS Printers
The following AFP-capable IBM Page Printers
are supported on Token-Ring and SDLC as specified. The Print Services
Facility/400 (PSF/400) feature of OS/400 Version 3 Release 1 is required for
the attachment of these printers.
Device
Type
Model Speed Attachment
------
----- ----- ----------
3935
1 35PPM Token-Ring, SDLC
The following IBM Page Printers are supported
on Token-Ring (using Remote Print Manager or PSF/2 Version 1.10 or later) and
SDLC as specified:
DeviceType Model Speed Attachment
------ ----- ----- ----------
3820 1* 20PPM Token-Ring, SDLC
3825 1 58PPM Token-Ring
3827 1 92PPM Token-Ring
3828 1 92PPM Token-Ring
3829 1 91PPM Token-Ring
3835 1 88PPM Token-Ring
3835 2 91PPM Token-Ring
3900 1 229PPM Token-Ring
3900 DUP 300PPM Token-Ring
* Withdrawn from marketing
Ordering Information
The following products are required for
printer attachment using Remote Print Manager or PSF/2 Version 1.1 or later.
Hardware
1. PS/2 or IBM PC AT
2.
3. IBM Personal
System/2* Model 30-021 or Model 30-E21
4.
5. Memory 640KB
6. Storage IBM 20MB Fixed Disk
7. Diskette
Drive One double-sided 3 1/2 inch
720KB
8. Keyboard Enhanced Personal Computer Keyboard
9. Display Monochrome or color display (80
column)
10.
11. or
12.
13. IBM Personal
Computer AT*
14.
15. Memory 640KB
16. Storage IBM 20MB Fixed Disk
17. Diskette
Drive One high-density 5 1/4 inch
1.2MB
18. Keyboard Either an Enhanced Personal Computer
Keyboard
19. or a Personal Computer AT
Keyboard
20. Display Monochrome or color display (80
column)
21.
22. IBM 4Mbps Token-Ring Network
Subsystem Feature or IBM 16/4Mbps Token-Ring Network Subsystem Feature
23. 8228 Multistation Access Unit
24. Token-Ring PC Cable (#3390 for
machine 8530)
25. Token-Ring PC Network Adapter II
(#9858 for machine 8530)
26. IBM S/370 Channel Emulator Card and
Cable (#3200 for machine 8530)
27. IBM S/370 Channel Terminators: Bus,
P/N 2282675; Tag, P/N 2282676
28. The IBM 3820 Printer requires the
3820 S/370 Interface Attachment (#3055)
Software
1. DOS Version 3.3 or subsequent releases
2.
IBM Personal
Computer APPC/PC, Version 1.11 (Program #75X1047), with most current PTFs
applied or subsequent releases
3.
Token-Ring
Network PC Adapter Support Interface (provided on the Network PC Adapter II
card), or Local Area Network Support Program V1.1 (Program #93X5683)
4.
Remote
PrintManager Version 2.0.3 (Program #25F5944)
Miscellaneous Devices
2480 AS/400 Wireless Access Point
These compact, lightweight devices act as
either wireless LAN bridges or wireless LAN repeaters which support transparent
roaming through a multi-cell network. Two models of the AS/400 Wireless Access
Point are supported:
·
2480 Model RS0, AS/400
Wireless RS-485 LAN Access Point. This device is used with the AS/400 Wireless
LAN Adapter to create a multi-cell wireless network. These access points may
connect to the AS/400 Wireless LAN Adapter through an RS-485 twisted-pair wired
backbone or wirelessly using the RF network. The 2480 Model RS0 is supported on
AS/400 Advanced Systems with an AS/400 Wireless LAN Adapter (#2668)
4754 Security Interface Unit (SIU)
The 4754 Security Interface Unit (SIU) is an
optional device that attaches to the Cryptographic Processor features #2620 or
#2628. The 4754 provides the ability to communicate with the IBM Personal
Security Card for highly secure importation of cryptographic keys into the
Cryptographic Processor. The 4754 may also be used for initialization of the
Cryptographic Processor. The 4754 SIU has tamper-resistant packaging. Three IBM
Personal Security Cards are included with each 4754. The 4754 must be ordered
separately from the Cryptographic Processor feature.
Software support for the 4754 is provided by
OS/400 Version 3 Release 1 or later, and the IBM Common Cryptographic
Architecture Security Services/400 PRPQ (5799-XBY).
5159 Programmable I/O Controller
The 5159 Programmable I/O Controller is an
asynchronous communication controller that performs computer processing and
data transfer between an AS/400 and downstream asynchronous devices. These
devices include but are not limited to time clocks, scales, badge readers,
scanners, robots, bar code readers. The 5159 attaches locally to any AS/400
communication port configured for asynchronous communications. The asynchronous
devices may attach locally or remotely under the control of user programs.
Remote devices may require the use of asynchronous modems to connect to the
5159.
5259 Migration Data Link (Withdrawn from
Marketing)
The 5259 Migration Data Link is a stand-alone
device that offers a cabled data path between the IBM System/36 or System/38
and the IBM AS/400 system. Systems are connected through their respective
workstation controllers.
The Migration Data Link, together with
programming support provided by the IBM AS/400 System/36 Migration Aid
(5727-MG1) or the IBM AS/400 System/38 Migration Aid (5714-MG1) and the IBM
Operating System/400 Version 3 Release 0.5 or later, provides for data
send/receive functions between systems. In addition, the Migration Data Link
provides access between systems by providing hot key availability from up to
seven workstations per Migration Data Link.
System/36 and System/38 Devices Not
Supported by the AS/400
Note 1: RPQs are available to convert models
012 and 020 to models T12 and T20 which are supported by 9402.
None for the C models.
Keyboard Support
The 5250-style keyboards supported by the
System/36 and System/38 are also supported by the Twinaxial Workstation
Controller. Countries that are not listed below do not have a country-unique
keyboard that is supported by the local workstation controller. The Twinaxial
Work Station Controller will support the following keyboard IDs:
122 IBM
Typewriter Enhanced
Country/Language (1A) (G)
Arabic
X/Basic 239 239
Austria/Germany 265 129*
Belgium 269 120*
Canadian/French 277 058*
Cyrillic 241 241
Denmark 281 159*
Finland/Sweden 285 153*
France 251 120*
Greece 218 218
Hebrew 210 113
Iceland 197 197
Italy 293 142*
Japan
(Katakana/Kanji) 694R 694R
Latin
America 170 171*
Latin 2 114 114
Netherlands 101 143
Norway 281N 155*
Portugal 301 163*
Spain 172 173*
Switzerland/French 714F
150F*
Switzerland/
German and Italian 714G 150G*
Thailand --- 190
Turkey 402 179
United
Kingdom 313 168*
United
States 101 101G*
Yugoslavia 234 234
The 122 Typewriter Keyboard is supported on
the 3179, 3180, 3196 and 3197 Display Stations. The IBM Enhanced Keyboard is
supported on the 3179 (US only), 3196, and 3197 Display Stations.
* The indicated IBM Enhanced Keyboards are
emulated by the ASCII Workstation Controller.
Code Page Support
The Twinaxial and ASCII Workstation Controller
will support the following code pages and character sets:
Country/ EBCDIC EBCDIC ASCII
Language Code Character
Code
Page Set Page***
Arabic
X/Basic 420 235 ---
Austria/Germany
273, 500 697 819*, **
Belgium 500 697 819
Canadian/French
500, 260 697 819*, **
Chinese
Simplified 037 697 ---
Chinese
Traditional 037 697 ---
Cyrillic 880 960 ---
Denmark 277, 500 697 819
Finland/Sweden 278, 500
697 819
France 297, 500 697 819*, **
Greece 423 218 ---
Hebrew 424/2 941/2 ---
Iceland 871, 500 697 ---
International 500 697 ---
Italy 280, 500 697 819*, **
Japan
English 281, 500 ---
---
Katakana/Kanji 290 --- ---
Korea 037 697 ---
Latin
America 284, 500 697
819*
Netherlands 037, 500 697 ---
Norway 277, 500 697 819
Portugal 037, 500 697 819
Spain 284, 500 697 819*
Switzerland/
French 500
697 819
Switzerland/
German and
Italian 500 697
819
Thailand 838 938 ---
Turkey 905 965 ---
United
Kingdom 285, 500 697
819*, **
United
States 037, 500 697
367
Yugoslavia 870 959 ---
* On the 3163 and 3164 displays, the ASCII
code page is the national language code page, using character set ISO 646 with
the addition of the national language characters supported on those displays.
** On the 3101 display, the ASCII code page is
the national language code page, as supported by that display.
*** Code page 819 is IBM's code page of ISO
8859, character set 00697. IBM ASCII displays supported are: 3151, 3161, 3162,
3163, 3164, and 3101-23.
The SNA*ps 5250 (1) Version 1.5 that is used
with the direct attachment of Macintosh devices to the AS/400 systems supports
the following code pages:
Country/Language Code PageUS English 037Multinational 500Austrian/German 273Brazilian/Portuguese 037Danish 277Finish 278
French 297 (supports French AZERTY and Qwerty)Italian 280Netherlands 037Norwegian 277Portuguese 037Spanish 284Spanish Speaking 284Swedish 278
English (UK) 285
·
9404 System Unit:
o
Width: 350mm (13.8 in.)
o
Depth: 750mm (29.5 in.)
o
Height: 650mm (25.6 in.)
o
Weight: 91kg (200 lbs)
The 9404 is suitable for use in a "quiet
office" environment.
* The IBM 9348
model 2 and IBM 7208 models 2 and 12 tape drives have a dry bulb operating
temperature range of 16 to 32C (60 to 90F).
Voltage
The 9404 can operate at either low voltage
(100-127 VAC) or high voltage (200-240 VAC), 50/60 Hz. The default will be low
voltage (100-127 VAC). A specify code (#2961) is required if the customer wants
to use high voltage in order to receive the applicable power cord/plug.
·
ASCII devices attached to
a AS/400 may not provide the same response time as 5250 devices. ASCII displays
do not have identical keyboards, attributes, character sets, and functions to
5250 displays. Configuration of ASCII devices is more extensive than 5250
devices.
AS/400 PC Support
is not supported for IBM Personal Computers or IBM Personal System/2s attached
to 5251-12, 5294, 3174/3274, 5208, 5209, or ROLMbridge.
The minimum system configuration consists of a
9404 System Unit, a system console (display) and 5853 (or equivalent) modem.
All models of the AS/400 require the appropriate model-unique version of AS/400
Licensed Internal Code. This model-unique licensed internal code is delivered
on magnetic media with the system unit and with model upgrades. The media used
is that required for the device specified as the system alternate IPL device.
The licensed internal code may also be preloaded on disk storage.
The program size of the IBM AS/400 Licensed
Internal Code for the 9404 is 76.5MB.
The system console may be any supported
display or IBM Personal Computer emulating a supported display or Personal
System/55 (AP only) attached to the Twinaxial Workstation Controller or 5209
Link Protocol Converter or a 3151, 316X, or equivalent attached to the ASCII
Workstation Controller or the 5208 Link Protocol Converter. An Apple Macintosh
computer workstation may be utilized as the system console when attached to a
9404 MFIOP via the Workstation Adapter (for LocalTalk) feature. The console
(display) should be located within 6 meters (20 ft.) of the operator's panel
and the operator's panel must be viewable from this display. Although required,
the system console is not a component of the base system unit.
Although a printer is not required for
service, IBM's ability to diagnose the system and perform upgrades is greatly
enhanced when a printer is available.
An IBM 5853, 7855, or equivalent modem is
required for electronic customer support but is not a component of the base
system unit.
The 9404 C models and DASD features are
designed to operate with OS/400 Version 1 Release 3 or subsequent releases.
It is recommended that all B, C, and D model
systems be at Version 2 Release 1 or subsequent release and that the current
level cumulative PTF package be applied in conjunction with the installed
release. When performing a system upgrade, it is suggested that the IBM service
support system and the Preventative Service Package are checked to ensure that
required PTFs are available for installation.
OS/400 Version 2 Release 2 and later includes
programming that provides for the detection of processor model changes on the
9404, via the use of a 16-character system password. The purpose of the system
password is to identify all model changes to help maintain the quality and
integrity of the system and to insure the protection of IBM's intellectual
property, including IBM Licensed Internal Code and Licensed Programs. After the
installation of OS/400 Version 2 Release 2 or later, the system will require a
single entry of the system password when a system model change is performed.
There are also rare service conditions that
may require re-entry of the system password. If the password must be entered
and it is not known, the customer or service representative can select to
operate in system password bypass mode. This will allow time to contact the
marketing representative, who must obtain the correct system password by
placing an RPQ order. If the correct system password is not available and the
bypass period expires, the system will not complete the next IPL until the
correct system password is provided. In an emergency (system down situation),
IBM service can obtain the system password by contacting the ABS Product
Support Center.
For more details on the system password, see
the "System Operator's Guide," SC41-8082.
9404 installation, model conversion, and
optional feature installation will be done by an IBM service representative.
The modem used for electronic customer support
must conform to the following technical specifications:
The following Electronic Customer Support
connectivity is supported:
Connectivity Summary
(For electronic customer
support)
IBM
5853 IBM 7855
-------- --------
Switched Line to:
IBM service support system 2400bps 2400bps*
via direct dial
IBMLink via IIN 2400bps up to 9600bps
Remote Q & A via IIN 2400bps up to 9600bps
Leased Line to:
IBM service support system 2400bps up to 9600bps
via IIN
IBMLink via IIN 2400bps up to 9600bps
Remote Q & A via IIN 2400bps up to 9600bps
*
7855 in 5853 compatibility mode at 2400bps.
The following publications are shipped with
the 9402 Models E04, E06, F04, and F06. To order additional copies, contact
your IBM representative.
SLSS is available by order number only.
Customers currently subscribing to SLSS will receive publication updates
automatically.
The following additional publications are
available:
·
#9022 - EIA 232/V.24
Cable which attaches to the EIA 232/V.24 Adapter feature (#6152) and conforms
to:
o
EIA 232-C and 232-D
o
V.24/X.21 bis
o
V.25 bis for Serial
Auto-dial Modems
This cable must be ordered if the connection
is to any modem eliminator or modem that has a feature known as "Signal
Quality Detect" and does not implement CCITT/V.54 loop 2 and loop 3 tests
on interface pins 21 and 10.
·
#0040 Mirrored System
Disk Level Protection
o
When added to an initial
order, this specify code will cause the order to fail if sufficient DASD is not
ordered to support device level mirrored protection. On upgrade orders, a
warning message will be generated during installation of the upgrade if
sufficient DASD is not available to support device level protection across the
system.
This is the default cable and must be ordered
when the connection is to an IBM modem or a non-IBM modem that implements
CCITT/V54 loop 2 and loop 3 tests and does not have the "Signal Quality
Detect" feature.
The 9404 System Unit can operate at either low
voltage (100-127VAC) or high voltage (200-240 VAC). The appropriate system
power cord will automatically be supplied based on the three-digit country
code. If other than the default option is required, specify:
#2960 120-Volt Power Cord (Default for U.S.,
Canada, AP)
#2961 240-Volt Power Cord (Default for EMEA, LA)
| BXX
| CXX
| DXX |Required
Feat Price File Name | PXX |
TXX | | OS/400
Code (26 Character Limit) |10 20|10 20 25|10 20 25|Release
---- ---------------------------- |-- --|-- --
--|-- -- --| -------
0014 EARLY PUBS SHIPMENTS |
| | |V2R3
0019 3995 Opt Libr DataSr Attach |
| |M M M
|V2R1.0
0021 7208 Tape attached to #2621 |
| |M M M
|V2R3
0023 3490 E-01 Tape Device |
| |M M M
|V2R3
0024 9348-002 Lc1 Scr Stnd Alon |
| |M M M
|V2R3.0
0025 3490-CXA IN OTHER SYSTEM |
| | |V2R3
0026 3490 IN TAPE LIBRARY |
| | |V2R3
0027 3490 C10,11,22 Other System |
| | |V2R3
0028 Migrate 3490 C10,11,22 |
| | |V2R3
0035 9427-210 1c1 Scr Stnd Alon |
| |M M M
|V3R1.0
0036 3490 E-11 Tape Device |
| |M M M
|V2R3
0039 Locally Sourced 9427-211 |
| |M M M
|V3R1
0054 3490-E11 Lc1 Scr Side Mnt |
| |M M M
|V2R3
0055 9427-211 Lc1 Scr Side Mnt |
| |M M M
|V3R1.0
0040 Mirrored System Disk Level |
| | |
0042 Mirrored System IOP Level |
| | |
0043 Mirrored System BUS Level |
| | |
1310 SYS for Redistribution |
| |S S S
|V2R3
2924 English |S S
|S S
S |S S S |V1R1
2928 French |S S
|S S
S |S S S |V1R1
2929 German |S S
|S S
S |S S S |V1R1
2930 Japanese Kanji |S S |S S S
|S S
S |V1R1
2931 Spanish |S S
|S S
S |S S S |V1R1
2932 Italian |S S
|S S
S |S S S |V1R1
2935 French Canadian |S S |S S S
|S S
S |V1R1
2962 Traditional Chinese |S
S |S S S |S S S |V1R1
2969 Korean |S S
|S S
S |S S S |V1R1
2978 Portuguese |S S
|S S
S |S S S |V1R1
2982 Finnish |S S
|S S
S |S S S |V1R1
2983 Norwegian |S S
|S S
S |S S S |V1R1
2987 Swedish |S S
|S S
S |S S S |V1R1
2988 Dutch |S
S |S S S |S S S |V1R1
2993 Danish |S S
|S S
S |S S S |V1R1
2998 Simplified Chinese |S S |S S S
|S S
S |V1R1
2960 120 Volt power cord |S
S |S S S |M M M |V1R1
2961 240 Volt power cord |S
S |S S S |M M M |V1R1
5000 TSP Specify Code | | |S
S S |V1R1
5001 Customer Solution Center |
| | |V1R1
5002 AS/400 CDSC-Roch MFG |
| | |V1R1
5005 Preload Option | | |S
S S |V1R1
5008 MES Fastpath |
| | |V1R1
5009 Special Handling/Scheduling |
| | |V1R1
5348 Base Tape Upgrade (1.2GB) |
| | |V2R1
5349 Base Tape Upgrade (2.5GB) |
| | |V3R0.5
5501 Alt IPL Spec for QIC-120 |
| | MR|V2R3
5504 Alt IPL Spec for 3490 EXX |
| | MR|V2R3
5507 Alt IPL Specify for 9348 | | |
MR|V2R1
5508 Alt IPL Specify for 3422 |
| | M |
5509 Alt IPL Specify for 3430 |
| | M |
5510 Alt IPL Spec for QIC-525 |
| | MR|V2R1
5511 Alt IPL Specify for 3480 |
| | M |
5512 Alt IPL Spe 3490 C10,11,22 |
| | |V2R3
5513 Alt IPL Specify for 3490 |
| | M |
5514 Alt IPL Specify for 7208 |
| | MR|V2R1
5516 Alt IPL Spec for QIC-1000 |
| | MR|V2R1
5517 Alt IPL Spec for QIC-2500 |
| | MR|V3R0.5
7347 Base Tape Upgrade (525MB) |
| | |V2R1
9022 EIA 232/V.24 Cable Specify *|MR MR|MR MR MR|SR SR SR|V1R1
9023 EIA 232/V.24 E Cable Spec *|MR MR|MR MR MR|SR SR SR|V1R1
9024 Token Ring Cable Spec *|
| |BR BR BR|V3R1
9025 Ethernet Cable Spec *| | |BR BR BR|V3R1
9050 Twinaxial Workstn Control |
| | |V2R2
9054 LocalTalk Workstn Control |
| | |V2R3
9100 315MB Disk Unit Relocation |MR MR|MR MR MR|MR MR MR|V1R2.1
9101 Stand Battery Power Unit |
| | |V2R1.1
9106 Standard Dual Disk (640MB) |
|S S S |S S S |V1R2.1
9109 Std 988MB Disk Unit Spec |
| | |V2R1.1
9120 Standard Dual Disk (800MB) |
| |S S S
|V2R1
| BXX
| CXX
| DXX |Required
Feat Price File Name | PXX | TXX | | OS/400
Code (26 Character Limit) |10 20|10 20 25|10 20 25|Release
---- ---------------------------- |-- --|-- --
--|-- -- --| -------
9140 Twinaxial Workstn Control |MR MR!MR MR MR|MR MR MR|V1R1
9141 ASCII Workstation Control |MR MR|MR MR MR|MR MR MR|V1R1
9201 Dual Disk Install-Sys Unit |
| |S S
|V2R1
9202 Dual Disk Install-Exp Unit |
| |M M M
|V2R1
9347 Std 525MB 1/4" Tape Spec |
| |S S S
|V2R1
9348 Std 1.2GB 1/4" Tape Spec |
| | |V2R1.1
9501 1/2" MULIC (REEL) on upgrade | |
| |
9502 1/2" MULIC (CART) on upgrade | |
| |
9503 8MM
MULIC (CART) on upgrade |
| | |
9602 STD 1.031GB Disk Unit Spec |
| | |V2R3
9624 Store Device Control Spec |
| | |V2R1.1
9814 20FT Antenna Cable | | |MR MR MR|V3R1
9815 50FT Antenna Cable | | |MR MR MR|V3R1
9862 EIA 232/V.24 One-Line 20E *|
| |S S S
|V2R1
9865 EIA 232/V.24 One-Line 50E *|
| |S S S
|V2R1
9879 20ft/6m V.35 CCITT Cable *|
| |MR MR MR|V2R3
9880 80ft/24.4m V.35 CCITT Cable *| |
|MR MR MR|V2R3
9882 20ft/6m RS449/V.36 CCITT Cab*| |
|MR MR MR|V2R3
9883 80ft/24.4m RS449/V.36 CCITT *| |
|MR MR MR|V2R3
9884 150ft/45.7m RS449/V.36 CCITT*| |
|MR MR MR|V2R3
9885 20ft/6m X.21 CCITT Cable *|
| |MR MR MR|V2R3
9890 Omni-Directional Ant (360) |
| |MR MR MR|V3R1
9891 Hemispherical Ant (180 Deg) |
| |MR MR MR|V3R1
9892 Directional Antenna (90 Deg) | |
|MR MR MR|V3R1
9980 Serpentine Cable Connection *| |
| |V2R3
Order Support
Codes
-------------------
S - Supported
(Load in price file and withdraw on same day)
P - Plant
install only
M - MES install
only
B - Both Plant
and MES install
* - Cable
R - Removal
Price released
Feat Price File Name | BXX |
CXX | DXX |
Code (26 Character Limit) | PXX | TXX
| |
|10
20|10 20 25 |10 20 25|
---- ---------------------------- |-- --|-- -- -- |-- -- --|
0020 EMEA IBM Logo AS/400-Yugosl | | | |
0030 EMEA 7855 Modem |
| | |
Feat Price File Name | BXX | CXX | DXX
|
Code (26 Character Limit) | PXX | TXX
| |
|10 20|10 20 25|10 20 25|
---- ---------------------------- |-- --|-- -- --|-- -- --|
6070 Upgrade #6105 (320MB) to #6108 (640MB) |M M
|M M M |M M M |
6072 Upgrade #6107 (400MB) to #6121 (800MB) |M M
|M M M |M M M |
6078 Upgrade #6109 (988MB) to #6123 (1976MB) |
| | M |
6079 Upgrade #9109 (988MB) to #6124 (1976MB) |
| | M |
6080 Upgrade #6125 (988MB) to #6124 (1976MB) |
| | M |
6082 Upgrade #6603 (1967MB) to #6613
(3934MB) | | | |
6083 Convert #6602 to #6612 | |
| |
6084 Convert #6802 to #6602 | |
| |
6085 Convert #6802 to #6812 | |
| |
6086 Convert #6812 to #6612 | |
| |
6087 Convert #8612 to #6612 | |
| |
6088 Convert #9602 to #6602 | |
| |
6089 Convert #9602 to #6812 | |
| |
8512 Convert #6131 (5 1/4-inch | | | |
Diskette) to #6137 | |
|M M M |
8513 Convert #6132 (8-inch Diskette) to
#6138 | | |M M M
|
8518 Convert #7100 (Expansion Unit) to #7120 |
| | |
8519 Convert #7110 (Expansion Unit) to #7120 |
| | |
8520 Convert #6346 (1/4-inch Tape) to #6347 |
| | |
8521 Convert #2600 to #2624 | |
| |
8523 Convert #6346 (1/4-inch Tape) to #6348 |
| | |
9993 EMEA ship from Country Stock | | | |
Order Support
Codes
-------------------
S - Supported
(Load in price file and withdraw on same day)
P - Plant
install only
M - MES install
only
B - Both Plant
and MES install
* - Cable
R - Removal
Price released
The following optional features may be added
to the 9404 models. All are available when initially ordered and as field
upgrades except as noted. The IBM service representative is responsible for
installing all upgrades and optional features. Four card slots are available in
the 9404 System Unit. Five additional card slots are available in either the #7100,
#7110 or #7120 Expansion Units.
When ordering features, it is necessary to
consider the number of card slots required by the feature and the number of
card slots available in each model. The main storage slots are fixed. Any of
the four card slots can be used for I/O expansion. The number of I/O cards that
can be attached to each model is listed in the description of the feature.
When ordering a 9404 System Unit using the
HONE configurator CFAS400, the card slot count consideration will be handled
automatically by the configurator for initial orders. If the configurator is
not used, then the guidance provided in the feature descriptions should be used
to configure a system.
(For IBM US, No Longer Available as of
December 31, 1999)
The Cryptographic Processor feature performs
cryptographic functions based on a hardware implementation of the ANSI standard
Data Encryption Standard (DES) and the RSA Public Key Algorithm (PKA). (The RSA
algorithm was defined by R. Rivest, A. Shamir and L. Adleman.) Cryptographic
applications are a cost-effective way of providing confidentiality and/or
authentication and integrity assurance for many forms of valuable data. This
protection is especially important in networks, which may be vulnerable to
unauthorized access to data and resources. Application areas include banking,
Electronic Data Interchange (EDI) and protection of proprietary information
such as engineering drawings, customer lists, product plans, and personnel
records.
Functions provided include encryption and
decryption of data, authentication and verification of messages and data,
creation and management of financial personal identification numbers (PINs) and
management of cryptographic keys. The Public Key Algorithm supports the
generation and verification of digital signatures for applications requiring
positive electronic authentication of the identity of the sender of a message.
The PKA function also provides efficient distribution of encrypted DES
cryptographic keys.
Control of the tamper-resistant cryptographic
hardware is provided through the supporting PRPQs listed below and optionally,
through IBM Personal Security Cards using the IBM 4754-001 Security Interface
Unit. The cryptographic functions provided conform to the IBM Common
Cryptographic Architecture, are compatible with the IBM Transaction Security
System, and interoperate with most DES based cryptographic products including
IBM cryptographic products on MVS, RS/6000 (WT only), OS/2 and DOS and the IBM
Cryptographic Support/400 licensed program (5728-CR1, 5738-CR1, 5763-CR1).
Through its extensive use of industry standards, the cryptographic processor
also interoperates with most other DES based cryptographic products.
This feature consists of an I/O processor card
with a cable to attach a 4754-001, and a cable wrap connector (1 per system).
The 4754-001, if desired, must be ordered separately.
Export authorization from the U.S. Government
is required to ship this feature to countries outside the U.S. and Canada. Other
countries may also regulate the export of this feature. Export licenses for
feature #2620 will generally be approved for shipment to financial institutions
and subsidiaries of U.S. companies. Export of feature #2628 may be approved in
other cases. Check with your local export regulation coordinator for specific
country requirements.
This feature requires the support of OS/400
Version 2 Release 3 and PRPQ 5799-FBR or OS/400 Version 3 Release 1.0 or later,
and PRPQ 5799-XBY. PKA functions require OS/400 Version 3 Release 1.0 or later,
and PRPQ 5799-XBY. Feature #2620 is not supported by IBM Cryptographic
Support/400.
Publications: For additional information refer
to the following:
Card slots required: One. Maximums: One on all
D and later models except 9402 D02 and E02 which do not support this feature.
(For IBM US, No Longer Available as of July 1,
1997)
The Battery Power Unit is standard on the 9404
E and F models and optional on all other models.
This feature provides a minimum of five
minutes of backup power after power has been lost. The backup power is to the
entire system unit or expansion unit. If feature #1101 is installed in the
system unit, then an additional feature #1101 must be ordered for the expansion
unit. When power is lost, the system will continue to operate. When the battery
current is low, the system will begin an orderly shut down if power has not
returned. The Battery Power Unit consists of the batteries and the charging
circuit. Card slots used: None. Maximum: Two. One in the system unit and one in
the expansion unit.
The 8MB Main Storage feature card plugs
directly into a card slot in the system unit and is available for the Models
C25 and D20. Two 4MB Main Storage Expansion (#4114) cards can be connected to
the 8MB Main Storage (#3108) card. Achieving the main storage maximum on the
C25 and D20 requires that 8MB Main Storage (#3108) cards be installed in the
two available main storage card slots and two 4MB Main Storage Expansion
(#4114) cards be connected to each card. Any existing 4MB Main Storage (#4104)
cards would have to be removed from the main storage slots. Card slots used:
One. Maximum: Two.
This 4 MB Main Storage card is available for
all models of the 9404 except the Model D25 and all E and F models. This card
plugs directly into a card slot in the system unit and is the first card
required when adding main storage to the Model B10/B20/C10 or C20. Card slots
used: One. Maximum: One on the B10 or C10, two on the B20, C20, C25, D10, or
D20. Achieving the main storage maximum on the Model C25 requires that 8 MB
Main Storage (#3108) cards be installed in the available main storage card
slots. Therefore, any existing 4 MB Main Storage (#4104) cards would have to be
removed from the main storage slots.
Order the upgrade from 4MB Main Storage
(#4104) to 8MB Main Storage (#3108) as a feature conversion MES.
The 4 MB Main Storage Expansion card plugs
into the 4 MB or 8 MB Main Storage cards #4104 or #3108. Up to two 4 MB Main
Storage Expansion cards may be connected to either the 4 MB or 8 MB Main
Storage cards. This feature is available for all models that support #4104 or #3108.
Card slots used: None. Maximum: Two on the Models B10 and C10 and four on the
Models B20, C20, C25, D10, or D20.
(For IBM US, No Longer Available as of July
31, 1996)
This feature is always required when DASD
features #6100, #6105, or #6108, are installed in the third DASD position of a
9404 Model B10, B20, C10, C20, or C25 System Units with the dual disk
installation feature, #7201, or in a Model B20, C20, or C25 attached #7100
Expansion Unit with the Dual Disk Install feature, #7202. One slot is required.
This feature is supported on the Models D10, D20, and D25 as part of an
upgrade, but is not orderable as a new feature. This device is not supported on
the E and F models.
(For IBM US, No Longer Available as of March
31, 1999)
This feature, available only for the D, E, and
F models, provides attachment capability for additional DASD in the system unit
or attached expansion units (#7100, #7110, or #7120) and in the Storage
Expansion Unit (#7203). One Storage Device Controller (#2624) is required to
support DASD in the third DASD position in all 9404 D10 and D20 models with
either specify code #9201 or feature #7201 on the system, and in the D25, and
in all E and F models. One Storage Device Controller (#2624) is required to
support DASD in the third DASD position of the #7110 or #7120 Expansion Unit or
the #7100 Expansion Unit with Dual Disk Install - Expansion Unit (#7202). The
Storage Device Controller is also required when attaching the Storage Expansion
Unit (#7203). Card slots used: One. Maximum: Two; one in the system unit and
one in the expansion unit.
(For IBM US, No Longer Available as of August
31, 1998)
Whenever the third DASD position is used in
either the 9404 System Unit or the Expansion Unit (#7100, #7110, or #7120), the
Feature Power Supply is required. Feature Power Supply is also required when
installing the Storage Expansion Unit (#7203). Card slots used: None. Maximum:
Two. One in the system unit and one in expansion unit.
(Withdrawn from Marketing)
The 5 1/4-inch Disk Unit - 315 MB is used for
permanent storage on the 9404. One optional disk unit may be added to a B10 or
B20 System Unit. One or two optional disk units may be added to a C10, C20, or
C25 System Unit. Up to four disk units may be installed in a Model B20, C20 or
C25 attached expansion unit. If Dual Disk Install - Expansion Unit (#7202) is
on the #7100 Expansion Unit, the fourth position may not be used for DASD.
Three DASD units may be installed in a #7110 Expansion Unit. Utilizing the
third DASD position in either the system unit or the expansion unit requires
the Feature Power Supply (#5133) as a prerequisite. This feature is supported
on the D, E, and F models as part of an upgrade, but is not orderable as a new
feature. Card slots used: None.
(For IBM US, No Longer Available as of
September 29, 1995)
The 3 1/2-inch single drive, 320 MB DASD unit
is used for permanent storage in the 9404 System Unit and in attached #7100,
#7110, or #7120 Expansion Units. One or two optional Single Disk Units may be
added to the system unit. In addition, one to four optional Single Disk Units
may be added to a #7100 Expansion Unit. If Dual Disk Install - Expansion Unit
(#7202) is on the #7100 Expansion Unit, the fourth DASD position may not be
used. One to three 320 MB single disk units may be installed in a #7110 or
#7120 Expansion Unit. Adding DASD to the third DASD position in either the
system unit or to an expansion unit requires Feature Power Supply (#5133) as a
prerequisite. Feature #2600 or #2624 may also be required. Refer to features
#2600 and #2624 descriptions. Feature #6105 can be upgraded to a feature #6108
Dual Disk Unit. This feature is supported on F models as part of an upgrade,
but not orderable as a new feature.
This feature is not supported on the 7203
Storage Expansion Unit. Card Slots Used: None. Maximums:
Model System Unit
Expansion Unit Expansion
(#7100) Unit*
----- -----------
-------------- ---------
C10 2 Not
Applicable Not Applicable
C20 2 4 or 3
C25 2
4 or 3
* Expansion Unit #7110, #7120 or Expansion
Unit #7100 with feature #7202. See Expansion Unit feature descriptions for
applicability to system models.
Maximum DASD units in the Expansion Unit
(#7100) is limited to three if the optional Cartridge Tape Unit (#6346) or the
Dual Disk Install - Expansion Unit (#7202) is installed.
(For IBM US, No Longer Available as of
November 4, 1994)
The Dual Disk Unit (640 MB) contains two 320
MB 3 1/2-inch DASD drives and can be installed in all 9404 models in the first
DASD position. This feature, available for field install only, by IBM service
representatives, is for upgrading the base DASD in a 9404 which still has a
single 315 MB disk unit in the first slot. The 315 MB disk unit which must be
removed from the first slot may be reinstalled in the third slot, or any
position in an expansion unit, or in any open position in another system.
IMPORTANT: Installing this feature requires a
total save and restore of all DASD on the system and reload of model unique
licensed internal code. In addition to the time this process takes, because it
involves licensed internal code, operating system code and customer data,
planning and care must be exercised to not experience data loss and its
associated recovery time. Instructions on the installation procedure are
included with feature #6106. An IBM service representative will install feature
#6106 and reload the model unique licensed internal code. The customer is
responsible for saving all data off the DASD before the installation of feature
#6106 and restoring all data after the IBM service representative completes the
installation. Card slots used: None. Maximums: One in the base (first position)
of a 9404 System Unit.
When feature #6106, Dual Disk Unit (640 MB),
is field installed in a system unit, it replaces the 315 MB disk unit in the
first position. The 315 MB disk unit which must be removed from the first
position may be reinstalled in the third position, (requires feature #5133), or
any position in an expansion unit, or in any open position in another system.
When that is done, specify codes need to be added to the system's inventory
record to accurately reflect the resulting DASD configuration.
When feature #6106 is added to a system unit
with two drives installed, and the drive in position one will be removed and
reinstalled in the third position, order specify code #9100, quantity two, on
the base system unit to indicate that both the original drives will remain in
the system unit. When #6106 is added to a system unit with three drives
installed, and the drive in the first position is removed, order specify code
#9100, quantity one, on the base system unit to indicate that the drive in the
second position will remain there. If the removed drive is subsequently
installed in an expansion unit, or in another system, a second #9100 specify
code should be ordered on the receiving system unit to indicate the presence of
an extra disk. These codes will be included automatically by the HONE
configurator, CFAS400, for orders to be entered via SYSLINK. If the
configurator is not used, the codes must be manually included in the
configuration and ordered.
This feature is orderable on the B, C, and D
models and is supported on the E and F models when ordered as a feature
conversion MES.
(For IBM US, No Longer Available as of
February 23, 1996)
This 3 1/2-inch single drive 400 MB DASD unit
is used for permanent storage in the 9404 B, C, D, E, and F model system units
and attached expansion units. One or two 400 MB single disk units may be added
to the system unit. One to four 400 MB single disk units may be added to a
#7100 Expansion Unit. If the dual disk install feature (#7202) is on the #7100
Expansion Unit, the fourth position may not be used for DASD. One to three 400
MB single disk units may be added to a #7110/#7120 Expansion Unit. One to two
400 MB single disk units may be added to the Storage Expansion Unit (#7203),
available on the Model D25 and E25 only. Whenever DASD is installed in the
third DASD position of either the system unit or an expansion unit, Feature
Power Supply (#5133) is required. Installing DASD in the third DASD position
may also require an additional storage device controller (#2600 or #2624). See
those feature descriptions for requirements.
Card slots used: None. Maximums: See the
following table for the maximum number of Single Disk Units (400 MB) (#6107)
that can be installed.
Model System Unit Expansion Storage Expansion Unit
Unit* (#7203)
----- ----------- -------------- ----------------------
D10/E10 2 3
not applicable
D20/E20 2 3
not applicable
D25/E25
F10/F20/F25 2 3
2
* Expansion Unit #7110, #7120 or Expansion
Unit #7100 with
feature #7202.
See Expansion
Unit feature descriptions for applicability to system
models.
Note: It may be desirable to upgrade (#6107) to (#6120) rather than continuing
to add single disk units.
(For IBM US, No Longer Available as of September
29, 1995)
This feature contains two 320 MB 3 1/2-inch
DASD drives for a total of 640 MB and can be installed in 9404 System Units
with Dual Disk Install - System Unit (#7201 or #9201) installed as a
prerequisite, or in an attached #7110/#7120 Expansion Unit, or in a #7100
Expansion Unit with Dual Disk Install - Expansion Unit (#7202) installed as a
prerequisite. Whenever DASD is installed in the third DASD position of either
the system unit or the expansion unit, Feature Power Supply (#5133) is required.
Installing dual disk units in the third position of a system unit or expansion
unit requires Storage Device Controller (#2600 or #2624). See feature #2600 or
#2624 descriptions for requirements. An installed Single Disk Unit-320MB,
feature #6105, may be converted in the field to a feature #6108, Additional
Dual Disk Unit-640MB. It is ordered as a Feature Conversion MES. This feature
is supported on the F models but not orderable on the F models.
This feature is not supported on the 7203
Storage Expansion Unit.
(For IBM US, No Longer Available as of
September 29, 1995)
The #6109 Single Disk Unit contains one 988 MB
3 1/2-inch disk drive. One #6109 may be installed in Model D10 or D20 System
Units. Prerequisites include Dual Disk Install - System Unit (#7201/#9201),
Feature Power Supply (#5133) and Storage Device Controller (#2624). One or two
#6109 features may be installed in Model D25, E and F model System Units.
Adding the second feature #6109 requires Feature Power Supply (#5133) and
Storage Device Controller (#2624) as prerequisites. One feature #6109 may be
installed in a #7100 Expansion Unit attached to a D model, with prerequisites,
Dual Disk Install - Expansion Unit (#7202), Feature Power Supply (#5133) and
Storage Device Controller (#2624). Up to three optional #6109 disk units can be
installed in D, E and F model attached #7110 and #7120 Expansion Units. Adding
a third optional feature #6109 to a #7110 or #7120 Expansion Unit requires
Feature Power Supply (#5133) and Storage Device Controller (#2624) as
prerequisites. Two #6109 features may be added to the Storage Expansion Unit
(#7203) on Models D25, E25 and F25 only. Card slots used: None. Maximums: See
the following table.
9404 Expansion Units Storage Expansion Unit
Model System Unit #7110/#7120 #7203
----- ----------- -------------- ----------------------
D10/D20 1 3
Not Applicable
E10/E20 2 3 Not Applicable
D25/E25
F10/F20 2 3
2
F25
(For IBM US, No Longer Available as of
February 23, 1996)
The Dual Disk Unit (800 MB) contains two 400
MB DASD drives and can be installed only in the B, C and D models in the first
DASD position. This feature, available for field installation is for upgrading
the base DASD in a B, C or D Model which was previously, or is being
concurrently upgraded from a Model that still has a single 315 MB disk unit in
the first DASD position. The 315 MB disk unit which must be removed from the
first DASD position may be reinstalled in the third DASD position, any position
in an Expansion Unit or in any open position in another system.
IMPORTANT: Installing this feature requires a
total save and restore of all DASD on the system and reload of model unique
licensed internal code. In addition to the time this process takes, because it
involves licensed internal code, operating system code and customer data,
planning and care must be exercised to not experience data loss and its
associated recovery time. Instructions on the installation procedure are
included with feature #6120. An IBM service representative will install feature
#6120 and reload the model unique licensed internal code. The customer is
responsible for saving all data off the DASD before the installation of feature
#6120 and restoring all data after the IBM service representative completes the
installation. Card slots used: None. Maximums: One in the base (first position)
of a 9404 B, C or D model system unit.
When feature #6120, Dual Disk Unit (800 MB),
is field installed in a system unit, it replaces the 315 MB disk unit in the
first position. The 315 MB disk unit which must be removed from the first
position may be reinstalled in the third position, (requires feature #5133), or
any position in an expansion unit, or in any open position in another system.
When that is done, specify codes need to be added to the system's inventory
record to accurately reflect the resulting DASD configuration.
When feature #6120 is added to a system unit
with two drives installed, and the drive in position one will be removed and
reinstalled in the third position, order specify code #9100, quantity two, on
the base system unit to indicate that both the original drives will remain in
the system unit. When #6120 is added to a system unit with three drives
installed, and the drive in the first position is removed, order specify code
#9100, quantity one, on the base system unit to indicate that the drive in the
second position will remain there. If the removed drive is subsequently
installed in an expansion unit, or in another system, a second #9100 specify
code should be ordered on the receiving system unit to indicate the presence of
an extra disk. These codes will be included automatically by the HONE
configurator, CFAS400, for orders to be entered via SYSLINK. If the
configurator is not used, the codes must be manually included in the configuration
and ordered.
Note: Dual Disk Unit (#6120) can be used on B and C models with OS/400 V2R1 or
higher.
(For IBM US, No Longer Available as of
February 23, 1996)
This 3 1/2-inch 800 MB dual drive DASD unit is
used for permanent storage in the 9404 B, C, D, E, and F model system units and
attached expansion units. Model BXX and CXX System Units require Dual Disk
Install - System Unit #7201. Model D10 and D20 System Units require Dual Disk
Install - System Unit (#7201 or #9201). The #7100 Expansion Units require Dual
Disk Install - Expansion Unit (#7202). The #7110/#7120 Expansion Units The
#7110/#7120 Expansion Units have dual disk install capability. One or two
optional dual disk units may be added to a B, C, or D model system unit. One to
three dual disk units may be added to #7100, #7110, or #7120 Expansion Units.
One to two dual disk units may be added to the Storage Expansion Unit (#7203)
on the Model D25, E25, and FXX only. Whenever DASD is installed in the third
DASD position of either the system unit or the expansion unit, Feature Power
Supply (#5133) is required. Installing 800MB DASD in the third DASD position
requires an additional storage device controller (#2600, #2624). See those
feature descriptions for requirements.
Card slots used: None. Maximum: See the
following table for the maximum number of Additional Dual Disk Unit (800 MB)
(#6121) that can be installed.
Model System Unit Expansion Storage Expansion Unit
Unit* (#7203)
--------- ----------- --------------
----------------------
C10 2
N/A not applicable
C20 2
3 not applicable
C25 2
3 2
* Expansion Unit
#7110/#7120 or Expansion Unit #7100 with feature #7202.
Upgrade Considerations: Feature #6107, Single
Disk Unit-400MB may be converted in the field to feature #6121, Additional Dual
Disk Unit-800MB, via a feature conversion MES. Card slots used: None.
(For IBM US, No Longer Available as of
September 29, 1995)
This 988 MB single DASD unit can be ordered as
a replacement for the first, base DASD unit installed in a 9404 B, C, or D
model that was, or is being upgraded to a 9404 D25 or any E or F model. This
feature should only be ordered when all available DASD positions are filled,
and additional DASD capacity is required. The base DASD unit that is replaced,
cannot be traded-in, and with all system DASD positions filled, cannot be
installed elsewhere on the system. The advantage of this upgrade is the
increase in DASD capacity with the new feature, over the removed feature. When
replacing a 315 MB DASD unit, one Specify Code #9100 must be ordered if the
second 315 MB disk unit remains in position two. When replacing a 640MB dual
disk unit, #6106 or #9106 must be removed. When replacing a 800MB dual disk
unit, #6120 or #9120 must be removed. Card slots used: None. Maximums: One in
the base (first position) of a 9404 E model system unit. This feature is
available for field install only.
(For IBM US, No Longer Available as of
September 29, 1995)
This 1,976 MB dual DASD feature can be ordered
as a replacement for the first, base DASD unit installed in a 9404 B, C, or D
model that was, or is being upgraded to a 9404 D25 or any E or F model. This
feature should only be ordered when all available DASD positions are filled,
and additional DASD capacity is required. The base DASD unit that is replaced,
cannot be traded-in, and with all system DASD positions filled, cannot be
installed elsewhere on the system. The advantage of this upgrade is the
increase in DASD capacity with the new feature, over the removed feature. When
replacing a 315 MB DASD unit, one Specify Code #9100 must be ordered if the
second 315 MB disk unit remains in position two. When replacing a 640 MB dual
disk unit, #6106 or #9106 must be removed. When replacing a 800 MB dual disk
unit, #6120 or #9120 must be removed. Card slots used: None. Maximums: One in
the base (first position) of a 9404 E model system unit. This feature is
available for field install only.
This feature provides space for adding up to
four single disk units (#6100, #6105, or #6107), a 1/4-inch cartridge tape
unit, and a diskette unit, and five feature card slots. If the 1/4-inch
cartridge tape unit is installed in the expansion unit, only three disk units
may be added to the expansion unit. If the expansion unit has Dual Disk Install
- Expansion Unit (#7202) installed, then, up to three Dual Disk Units (#6108 or
#6121) may be installed. Feature #7100 is orderable for the Models B20, C20,
and C25 only, and is supported on the D models. Expansion Unit (#7100) may be
upgraded to Expansion Unit (#7110/#7120).
Upgrade Considerations:
Feature #7100 Expansion Unit may be converted
in the field to feature #7110 Expansion Unit. This conversion provides Hardware
Data Compression (HDC) capability for 1/4-inch cartridge tape units installed
in the expansion unit. Dual Disk Install - Expansion Unit (#7202) is a
prerequisite feature for ordering this feature conversion MES.
Feature #7100 Expansion Unit may be converted
in the field to feature #7120 Expansion Unit. This conversion provides Hardware
Data Compression (HDC) capability for 1/4-inch cartridge tape units installed
in the expansion unit.
Feature #7110 Expansion Unit may be converted
in the field to feature #7120 Expansion Unit. Card slots used: None.
(For IBM US, No Longer Available as of July
31, 1996)
This feature is available for installation in
a 9404 B10/B20/C10/C20/C25 or D10/D20 (if feature #9201 is not factory installed)
system unit and is a prerequisite for the installation of Additional Dual Disk
Units, feature #6108 in the system unit. If the system unit has Feature (#7201)
and a Dual Disk Unit-640MB, feature #6106 or specify code #9106, installed in
the first position, then Additional Dual Disk Units (#6108) may be installed in
DASD positions two and three. If the system does not have #9106 or #6106, and
therefore has 315 MB Disk Units in DASD positions one and two, then only one
Additional Dual Disk Unit (#6108) may be installed in DASD position three.
Feature Power Supply (#5133) is always required when a DASD drive is installed
in the third DASD position of the system unit. Feature #2600/#2624, Magnetic
Storage Device Controller is also required when the Dual Disk Install - System
Unit (#7201), is installed on the system unit, and the third DASD position is
utilized. See feature #2600/#2624 description for details.
(For IBM US, No Longer Available as of July
31, 1996)
This feature is available for installation in
a 9404 attached Expansion Unit (#7100) and is a prerequisite for the
installation of Additional Dual Disk Units (#6108), in the expansion unit. With
this feature (#7202), up to three Additional Dual Disk Units (#6108) may be
installed in DASD positions one, two and three. Feature Power Supply (#5133) is
always required when a DASD drive is installed in position three of the
expansion unit. Magnetic Storage Device Controller, feature #2600 or #2624 is
also required when the Dual Disk Install-Expansion Unit (#7202), is installed
in the expansion unit, and the third DASD position is utilized. See feature
#2600/#2624 description for details. When Dual Disk Install (#7202) is
installed in an Expansion Unit (#7100), the fourth position cannot be used for
DASD.
(For IBM US, No Longer Available as of July
31, 1996)
An 8-inch diskette unit is available for use
in transferring data or programs between the 9404 and systems including the
9406, 5360, 5362, System/38 and other compatible systems. This feature cannot
be ordered for the 9404 D25, E, or F model System Units or the #7110 or #7120
Expansion Units. See feature #6138. Card slots used: None. Maximum: Two (#6131
or #6132)
(For IBM US, No Longer Available as of
November 4, 1994)
The 120MB 1/4-inch cartridge tape drive is a
low cost, high-function, streaming tape drive for the AS/400 9404 B, C and D
models. It may be used for save/restore, program distribution, migration, and
1/4-inch Cartridge tape interchange. This device requires the support of OS/400
Version 1 Release 1 or later.
Hardware Data Compression (HDC) is supported
on the Model D25 System Unit and when installed in the #7110 Expansion Unit.
Full interchange of data in the 120MB format
is supported with all the standard and optional 1/4-inch cartridge tape units
provided on the AS/400 9402, 9404 and 9406 models.
The 120MB 1/4-inch Cartridge Tape Unit
supports the following media and formats:
The 120 MB 1/4-inch Cartridge Tape Unit has an
effective data rate of 90KB per second when operating in the 120MB format.
The 120 MB 1/4-inch Cartridge Tape Unit
attaches to the 9404 system via the Storage Device Controller when attached as
a feature in the expansion unit.
Feature #6346 can be ordered and installed in
the Expansion Unit #7100 on B and C model systems. It is supported on D models,
but must be removed or converted to #6347 when upgrading to an E or F model (at
a charge). Card slots used: None. Maximum: One.
The IBM 0.25 Cleaning Cartridge Kit, P/N
21F8570, provides necessary head cleaning capability for the 120MB 1/4-inch
Cartridge Tape Unit.
(For IBM US, features #6347, #7347 and #8347
are No Longer Available as of November 4, 1994)
(For IBM US, feature 9347 is No Longer
Available as of July 31, 1996)
The 525 MB 1/4-inch cartridge tape drive is a
low cost, high-function, streaming tape drive for the all 9404 models. It may
be used for save/restore, alternate IPL, program distribution, migration, and
1/4-inch Cartridge tape interchange. This device requires the support of OS/400
Version 2 Release 1 or later.
Full interchange of data is supported with all
the standard and optional 1/4-inch cartridge tape units provided on the AS/400
9402, 9404, and 9406 systems.
The 525 MB 1/4-inch Cartridge Tape Unit
supports the following media and formats:
The 525 MB 1/4-inch Cartridge Tape Unit has an
effective data rate of 200KB per second when operating in the 525 MB format,
and 90 KB per second when operating in the 120 MB format.
The 525 MB 1/4-inch Cartridge Tape Unit
attaches to the 9404 system via the base Multi-Function I/O Processor in the
base tower, or the Storage Device Controller when attached as a feature in the
expansion unit.
Hardware Data Compression (HDC) is supported
on the Model D25 system unit, #7110/#7120 expansion units and on all E and F
model system units.
Feature #6347 is the 525 MB 1/4-inch Cartridge
Tape Unit available for all models of the 9404 in the #7100/#7110/#7120
expansion units.
Feature #7347, available via MES only,
provides for the upgrade of a 120MB 1/4-inch Cartridge Tape Unit to a 525 MB
model, and must be ordered with the upgrade of a 9404 B, C, or D model, without
a 525 MB 1/4-inch cartridge tape unit in the system unit (feature #8347 or
#9347), to a 9404 E or F model. There is no charge for this feature which can
only be ordered with an E or F model upgrade. Parts removed and/or replaced are
the property of IBM. Optional feature 120MB cartridge tape units (feature
#6346), are not supported on the 9404 E or F model and must be removed, or
converted, for a charge, to a 525MB 1/4-inch Cartridge Tape Unit (#6347).
Feature #8347 provides for the replacement of
a 120MB 1/4-inch Cartridge Tape Unit with a 525MB 1/4-inch Cartridge Tape Unit
on a 9404 B, C or D model system unit.
Feature #9347 is the specify code used to
designate a 525MB 1/4-inch Cartridge Tape Unit included in the base of a new
9404 D and E model system order.
The IBM 0.25 Cleaning Cartridge Kit, P/N 21F8570,
provides necessary head cleaning capability for the 525MB 1/4-inch Cartridge
Tape Unit.
The 1.2GB 1/4-inch cartridge tape drive is a
low cost, high-function, streaming tape drive for the 9404 Model D25 and all E
and F models. It may be used for save/restore, alternate IPL, program
distribution, migration, and 1/4-inch cartridge tape interchange. This device
requires support of OS/400 Version 2 Release 2 or later.
Full interchange of data is supported with all
the standard and optional 1/4-inch cartridge tape units provided on the AS/400
9402, 9404, and 9406 models, using the proper media and density.
The 1.2 GB 1/4-inch Cartridge Tape Unit
supports the following media and formats:
The 1.2 GB 1/4-inch Cartridge Tape Unit has an
effective data rate of 300 KB per second when operating in the 1.2 GB format,
200 KB per second when operating in the 525 MB format, and 90 KB per second
when operating in the 120 MB format.
The 1.2 GB 1/4-inch Cartridge Tape Unit
attaches to the 9404 Models D25 and all E and F models via the Multi-Function
I/O Processor in the base system unit or the storage device controller when
attached as a feature in a #7110 or #7120 Expansion Unit. Hardware Data
Compression (HDC) is supported. Feature #5348, available via MES only, provides
for the upgrade of a 120 MB 1/4-inch Cartridge Tape Unit to a 1.2GB model, and
must be ordered with the upgrade of a 9404 B, C or D model, without a 525 MB or
1.2 GB 1/4-inch Cartridge Tape Unit in the system unit (feature #8347, #9347,
#9348 or #7348), to a 9404 F model. There is no charge for this feature which
can only be ordered with an F model upgrade. Parts removed and/or replaced are
the property of IBM. Optional feature 120 MB Cartridge Tape Units (feature
#6346), are not supported on the 9404 F models and must be removed or
converted, for a charge, to a 1.2 GB 1/4-inch Cartridge Tape Unit.
Order feature #6348 for placement in a #7110
or #7120 Expansion Unit on any 9404 D25, E or F model (Plant or MES).
Order feature #7348 to replace the current
1/4-inch cartridge tape unit in the base of an installed system with the 1.2GB
unit. Order a REMOVE of the existing base tape unit and an ADD of feature
#7348. This feature is available only via MES to installed D25, E and F models.
Order feature #8348 from the plant to replace
the standard base 525MB 1/4-Inch Cartridge Tape Unit (#9347) with the 1.2GB
Tape Cartridge Unit on new E model. Feature #8348 can be ordered in place of
feature #7347 via MES on B, C, or D model upgrades to E models to obtain the
1.2GB Tape Cartridge Unit.
Feature #9348 is the specify code used to
designate a 1.2GB 1/4-inch Cartridge Tape Unit included in the base of a new
9404 F model system order. The IBM 0.25 Cleaning Cartridge P/N 46G2675 (US and
Canada), P/N 8191177 (outside of US and Canada), provides the necessary head
cleaning capability for the 1.2GB 1/4-inch Cartridge Tape Unit.
(For IBM US, #6349 No Longer Available as of
August 31, 1998)
(For IBM US, No Longer Available as of July 1,
1997)(For 7349, 8349)
The 2.5 GB 1/4-Inch Cartridge Tape Unit is a
low cost, high-function, streaming tape drive for AS/400 systems. It may be
used for save/restore, alternate IPL, program distribution, migration, and
1/4-inch cartridge tape interchange. The 2.5 GB 1/4-Inch Cartridge Tape Unit
records data in the QIC-2GB format. This device requires support of OS/400
Version 3 Release 0.5.
Full interchange of data is supported with all
the standard and optional 1/4-Inch Cartridge Tape Units provided on the AS/400
9402, 9404, and 9406 models, using the proper media and density.
The 2.5 GB 1/4-inch Cartridge Tape Unit
supports the following media and formats:
The 2.5 GB 1/4-Inch Cartridge Tape Unit has an
effective data rate of 300KB per second when operating in the QIC-2GB or
QIC-1000 formats, 200KB per second when operating in the QIC-525 format and
120KB per second when operating in the QIC-120 format.
Feature #6349 is the optional 2.5 GB 1/4-Inch
Cartridge Tape Unit for placement in the #7110/#7120 Expansion unit. This
feature requires V3R0.5. This feature is available only via MES to an installed
Model D25, all E models and can be installed in the plant or as an MES for all
F models.
Feature #7349 is ordered to replace the
current 1/4-Inch Cartridge Tape Unit in the base of an installed system with
the 2.5GB unit. Order a REMOVE of the existing base tape unit and an ADD of feature
#7349. This feature is available only via MES to an installed Model D25 or any
E or F models.
Feature #8349 is ordered from the plant to
replace the standard base 1.2GB 1/4-Inch Cartridge Tape Unit (#9348) with the
2.5GB 1/4-Inch Cartridge Tape Unit on a new F Model. Feature #8349 can be
ordered in place of feature #5348 via MES on B, C or D model upgrades to F
models to obtain the 2.5GB 1/4-Inch Cartridge Tape Unit.
Maximums: Two on the Model D25, E and F
models.
(For IBM US, No Longer Available as of June
30, 2000)
This feature provides for attachment of one or
two 7208 Model 002 or Model 012 or 9348 Magnetic Tape Units in any combination,
or one 3995 Optical Library Dataserver Models 142, A43, 43, or 143 to 9404 B,
C, D, E, or F models. Feature #2621 supports alternate IPL from attached tape
drives when installed in the system unit of a 9404 D25, E or F model.
Hardware Data Compression is available in the
attachment for 8mm cartridge and 1/2-inch reel-to-reel tape applications. The
effective media capacity can be increased approximately 1.4 times, depending on
the data. AS/400 1/2-inch reel-to-reel compressed tapes are compatible with
System/38 3422 and 3430 compressed tapes.
Card slots used: One. Maximum: See the
Magnetic Tape Attachment Table.
(For IBM US,
withdrawn from marketing as of March 20, 1995)
The 3490 Magnetic Tape Subsystem Attachment
provides for attachment of the following Magnetic Tape Subsystem Models:
Subsystem Attachment (#2622) supports
attachment of up to eight 3490E/3490/3480 tape drives, or up to four 3430/3422
tape drives, and provides a hardware data compression function for use with all
tape drives listed above. The Hardware Data Compression (HDC) function can
increase the effective media capacity by up to two times, depending on the
data.
Feature #2622 supports IDRC when used to
attach a 3480, 3490, or 3490E Magnetic Tape Subsystem. IDRC can increase the
effective media capacity by up to three times, depending on the data. The
Hardware Data Compression (HDC) function can be used in conjunction with IDRC
in the drive, but does not necessarily result in greater data compression.
The two channel switch feature available on
all control units may be used with feature #2622.
Not all cables are supplied with this feature
and may need to be ordered separately.
·
Attachment of the 3430,
3422, 3480, or 3490/3490E AXX/BXX model tape drives requires the use of
External Channel (Bus/Tag) cables. These cables must be ordered separately. For
cable ordering information see "Physical Planning" manual
(GC22-7064).
I/O Card Slots Used: One. Maximum: See the
Magnetic Tape Attachment Table.
Power control is not provided for attaching
tape drives. The attached tape drives must be operated in "local"
power control mode and be manually powered on and off. The 3490E Models C10,
C11, and C22 are exceptions since these units are installed in 9406 feature
racks (#5040, #5042) or 9309 Model 2 rack Enclosure with either Specify Code
#9141 or #9171.
3490 and 3490 Automatic Cartridge Loader (ACL)
is supported in manual or auto mode, not system mode.
The ASSIGN function of the 3480, 3490, and
3490E Magnetic Tape Subsystem is not supported by the #2622 attachment during
the installation of AS/400 Licensed Internal Code, but is supported by the
OS/400 operating system.
The 3480 and 3490 except for 3490E Models C10,
C11, C22, D41, and D42, are intended for use in dedicated computer rooms with
or without raised floors. The noise levels exceed those typically associated
with equipment installed in a general office area.
Feature #2622 supports a data transfer rate of
up to 3.0MB/sec.
One of the following specify codes can be
entered on the 9404 order to describe which tape drive will be used for
alternate IPL device:
One of the following specify codes is required
when migrating 3490E CXX tape drives to a 9404 system:
(For IBM US, No Longer Available as of March
31, 1999)
The 3490 Magnetic Tape Subsystem Attachment/HP
provides for attachment of one of the following Magnetic Tape Subsystem to all
9404 models.
The 3490 Magnetic Tape Subsystem Attachment/HP
is designed to offer higher performance than feature #2622. The 3490 Magnetic
Tape Subsystem Attachment/HP supports attachment of up to sixteen
3490E/3490/3480 tape drives, or up to four 3430/3422 tape drives. This feature
provides a hardware data compression function for use with all tape drives
listed above. The hardware data compression function can increase the effective
media capacity by up to two times, depending on the data. AS/400 data
compression on 1/2-inch reel-to-reel tapes are compatible with System/38 data
compression on 3422/3430 tapes. This feature supports IDRC for a 3480, 3490 or
3490E Magnetic Tape Subsystem. IDRC can increase the effective media capacity
by up to three times, depending on the data. The Hardware Data Compression
(HDC) function can be used in conjunction with IDRC in the drive, but does not
necessarily result in greater data compression. The two channel switch feature
on the 3422 A01 (#3005) and 3430 (RPQ) may be used with this feature.
This feature supports Alternate IPL (AIPL)
from all 3490 or 3490E models, including B02 and B20. Note that 9404 Models
D25, EXX and FXX only support AIPL with this feature. Also, the ASSIGN function
of the 3480, 3490 and 3490E Magnetic Tape Subsystem is supported during the
installation of AS/400 Licensed Internal Code (LIC) and OS/400.
Not all cables are supplied with this feature
and may need to be ordered separately.
·
Attachment of the 3430,
3422, 3480 or 3490/3490E Models AXX/BXX/DXX tape drives requires the use of the
External Channel (Bus/Tag) cables. The #2644 feature requires an IOP adapter
cable, feature #9980, for External Channel cable attachments. The External
Channel cables must be ordered separately. For cable ordering information see
Physical Planning Manual GC22-7064.
I/O Card Slots Used: One. Maximum: See the
Magnetic Tape Attachment Table.
·
Power control is not
provided for attached tape drives or libraries. They must be operated in "local"
power control mode and be manually powered on and off. The 3490E Models C10,
C11 and C22 are installed in 9406 feature racks (#5040, #5042) or 9309 Model 2
rack enclosures with either Specify Code #9141 or #9171.
Field installation:
Yes. Maximum: See the Magnetic Tape Attachment Table.
(For IBM US, No Longer Available as of July
31, 1996)
This feature provides for attachment of one or
two 9348 Model 2 Magnetic Tape Units to the 9404 B and C models. Alternate IPL
is not supported with this feature.
This feature is supported in the 9404 D, E,
and F models, but is not orderable as a new feature. See feature #2621 for D,
E, and F models.
Card slots used: One. Maximum: See the Magnetic
Tape Attachment Table.
(For IBM US, No Longer Available as of July
31, 2001)
This feature is an I/O processor that is used
to attach external tape devices and DASD using SCSI interface.
On 9404 D, E and F models, this feature
provides for attachment of the 3490 Model E01 1/2-inch Cartridge Tape
Subsystem.
Each #6501 feature provides for attachment of
up to two 3490 devices. The maximum number of tape devices supported is
dependent on the system type and the number of other external tapes attached.
The maximum number of #6501 features that can be installed to support tape is
two. Card slots required: One.
The maximum number of Tape IOPs is as follows:
FC #2621 B10 B20 C10 C20 C25 DXX EXX F10 F20 F25
-------- --- --- --- --- --- --- --- --- --- ---
System 1
1 1 1 1 1
2 2 2 2
Exp Unit 0
1 0 1 1 1
2 2 2 2
-------- --- --- --- --- --- --- --- --- --- ---
Sys Max 1
1 1 2 2 2
2 2 4 4
FC #2622 B10 B20 C10 C20 C25 DXX EXX F10 F20 F25
-------- --- --- --- --- --- --- --- --- --- ---
System 1
1 1 1 1 1
1 1 1 1
Exp Unit 0
1 0 1 1 1
1 1 1 1
-------- --- --- --- --- --- --- --- --- --- ---
Sys Max 1
1 1 1 1 1
1 1 1 1
FC #2644 B10 B20 C10 C20 C25 DXX EXX F10 F20 F25
-------- --- --- --- --- --- --- --- --- --- ---
System 1
1 1 1 1 1
1 1 1 1
Exp Unit 0
1 0 1 1 1
1 1 1 1
-------- --- --- --- --- --- --- --- --- --- ---
Sys Max 1
2 1 2 2 2
2 2 2 2
FC #2647 B10 B20 C10 C20 C25 DXX EXX F10 F20 F25
-------- --- --- --- --- --- --- --- --- --- ---
System 1
1 1 1 1 1
2 2 2 2
Exp Unit 0
1 0 1 1 1
2 2 2 2
-------- --- --- --- --- --- --- --- --- --- ---
Sys Max 1
2 1 2 2 2
2 2 2 2
-------- --- --- --- --- --- --- --- --- --- ---
FC #6501 B10 B20 C10 C20 C25 DXX EXX F10 F20 F25
-------- --- --- --- --- --- --- --- --- --- ---
System 0
0 0 0 0 1
1 1 1 1
Exp Unit 0
0 0 0 0 1
1 1 1 1
-------- --- --- --- --- --- --- --- --- --- ---
Sys Max 0
0 0 0 0 2
2 2 2 2
-------- --- --- --- --- --- --- --- --- --- ---
Max All 1
2 1 2 2 2
2 2 4 4
Note: Maximum
number of feature #2622 plus 2644
plus 6501 must
not exceed two.
(For #6050 for IBM US, No Longer Available as
of May 31, 2001)
(For IBM US, #9050 No Longer Available as of
August 31, 1998)
This enhanced, combined workstation controller
and adapter offers higher performance and more on-card memory than feature #6140.
One eight-port workstation attachment is provided to support up to 40
additional 5250-type displays or printers with a maximum of seven devices per
port. This controller contains additional memory which allows support of the
graphical 5250 display data stream extensions and entry field 5250 display data
stream extensions. The #6050 workstation controller supports customizing of
keyboard translation and printer definition tables. Both SCS and IPDS data
streams are supported. OS/400 Version 2 Release 2 or later is required to
support this feature. Specify #9050 for the base Enhanced Twinaxial Workstation
Controller and order feature #6050 for additional twinaxial controllers.
Feature #6050 is supported on the 9404 B, C, D, E, and F models. I/O Card Slots
Used: One. Maximums: See Workstation Configuration Table.
(For IBM US, No Longer Available as of March
31, 1997)
The #6054/#8054/#9054 Workstation Adapter
feature provides an alternative workstation attachment architecture to the
currently supported twinaxial and ASCII interfaces. The Workstation Adapter
feature is supported on all 9404 D, E and F models.
LocalTalk(1) networking was developed by Apple
Computer, Inc., to connect multiple local workstations via an easily
configurable bus network. Physically, each workstation is connected to the
LocalTalk shielded twisted-pair cable network by a connector box. A LocalTalk
network can support up to 32 devices. Devices include Macintosh personal
computers, Macintosh printers, LocalTalk compatible devices and the IBM
Workstation Adapter feature. The maximum length of a LocalTalk network is 300
meters (988 feet). The maximum speed of the LocalTalk network is 230.4Kbps.
LocalTalk workstation networking is supervised
by portions of the AppleTalk protocol. OS/400 Version 2 Release 3 or later
supports attached devices as local 5250 workstations. The program SNA*ps 5250
Emulator Version 1.2, is required on the Macintosh workstation. Although each
network can physically connect 32 devices, including the Workstation on
Adapter, the recommended performance limitation is 20 active sessions.
The Workstation Adapter feature is packaged on
a standard daughter card and attaches as feature #8054 or #9054 to the MFIOP or
as feature #6054 to the Six-Line Communications Controller (#2623). Each
Workstation Adapter feature is shipped with a connector box and a two- foot
cable, used to attach it to a LocalTalk cable network.
Feature #8054/#9054 supports attachment of an
Apple Macintosh as the system console except on the Models D10 and D20. When
attached to the MFIOP the #8054/#9054 is co-resident with the standard ECS
adapter.
One Workstation Adapter is supported on the
Six-Line Communications Controller. A second adapter on the controller may only
be an X.21, EIA 232/V.24 or V.35 communication adapter. The third of three
adapter positions must not be used.
Feature #8054 should be ordered when LocalTalk
is desired for the system console and feature #9050, base Twinaxial Workstation
Controller or #9041, base ASCII Workstation Controller were selected. Feature
#9054 should be ordered when LocalTalk is desired for the system console and no
additional twinaxial or ASCII workstation controllers are desired.
The number of #6054/#8054/#9054 features
supported by model is listed in the Workstation Configuration Table. of Apple
Computer, Inc.
(For IBM US, No Longer Available as of July
31, 1996)
The Twinaxial Workstation Controller is a
combined workstation controller and workstation adapter for attaching 5250-type
displays and printers to the 9404. A total of eight ports are provided with
this card. Up to 40 5250 type displays or printers may be supported with a
maximum of seven devices per port. Features #6140 and #9140 support customizing
of keyboard translation and printer definition tables when running with OS/400
Version 2 Release 2. Feature #6140 is an optional twinaxial workstation
controller. Feature #9140 is the base twinaxial workstation controller specify
code. Card slots used: One. Maximums: See Workstation Configuration Table.
(For IBM US, No Longer Available as of March
31, 1999)
The ASCII Workstation Controller is a combined
workstation controller and workstation adapter for attaching selected ASCII
displays and printers to the 9404. The ASCII Workstation Controller can support
up to 18 ASCII devices. A 6-port workstation attachment is supplied with the
ASCII controller. The ASCII 12-port workstation attachment, feature #6142, also
attaches to the workstation controller and provides an additional 12 ports.
Host graphics are not supported on devices attached to this controller. Both
features #6141 and #9141 support customizing of keyboard translation tables
when running with OS/400 Version 2 Release 2.
With AS/400 PC Support you can attach a
graphics-capable DOS-based PC to the ASCII workstation controller and use host
graphics (i.e., it is transparent to the ASCII WCS; it is just passing data between
BGU and the DOS PC).
Either EIA 232 (CCITT V.24/V.28) or EIA 422-A
(CCITT V.11) interfaces are supported from any of the ASCII ports at speeds up
to 38,400bps. For specific information about these interfaces see the
"AS/400 Planning Guide - 9404" (GA21-9914) and the "ASCII
Workstation Reference" manual (SA21-9922). The EIA 422-A interface allows
local attachment of devices from up to 4,000 feet (1200 meters). The EIA 232
interface allows either local attachment of devices from up to 50 feet (15 meters)
or remote attachment via modems. Devices are supported via point-to-point
asynchronous duplex modems which may be switched or nonswitched at speeds up to
19,200 bps. The data buffering capability of asynchronous modems or
multiplexors is not supported.
The following IBM modems (or equivalent) are
supported in asynchronous mode:
Card slots used: One Maximums: See Workstation
Configuration Table.
The ASCII 12-Port Workstation Attachment plugs
into the ASCII Workstation Controller providing an additional 12 ports to the
six provided with the ASCII Workstation Controller feature (#6141). Card slots
used: None. Maximum: One per ASCII Workstation Controller.
Maximum of the above workstation controllers
(#6050, #6140, #6141, #9050, #9140, #9141, #6054, #9054, and #8054) supported
by model:
System Unit Maximums Expansion Unit Maximums
Twinax ASCII L-Talk Total Twinax ASCII L-Talk Total
------ ----- ------ ----- ------ ------ ------ -----
C10 1
2 0 3 0 0
0 0
C20/25 1
2 0 3 1 2 0 3
Total System Maximums
Twinax ASCII L-Talk Total
------- ---- ------ -----
C10 1 2 0 3
C20/25 2 4 0 6
The 9404 offers a wide variety of
communications and connectivity functions. Multiple networks, SNA, X.25, X.21,
Token-Ring, FDDI, Ethernet, and ISDN are available with connectivity provided
by multiple protocols: ASYNC, BSC, SDLC, IDLC, X.25, X.21 Short Hold Mode/
Multiple Port Sharing function and Frame Relay. Multiple environments are also
available: AS/400 as a host to personal computers and other AS/400s, System/36s
and System 38s, AS/400 as a peer system to other AS/400s, System/36s,
System/38s and other IBM peer systems; and AS/400 as a remote system in a
System/370 controlled network.
Using appropriate T1 (US), E1 (Europe) or J1
(Japan) DCE (Multiplexor or DSU/CSU), the 9404 supports SDLC data lines at
speeds up to 2.048 Mbps.
The 9404 will communicate via the EIA 232/V.24
and V.35 adapters through a 9751 CBX, ROLM CBX 8000 and ROLM CBX 9000 using
Data Communications Module (DCM). Additionally, a Data Terminal Interface (DTI)
is supported for EIA 232/V.24 asynchronous connections through the ROLM CBX
8000 and ROLM CBX 9000.
The following is a list of current IBM systems
and modems that may be attached to the 9404:
·
IBM Systems
o
AS/400, 9402, 9404, 9406
o
3090, 308x, 43xx, 9370,
System/390, ES9000
o
System/36, System/38,
System/6000, Series/1,System/88
o
Personal Computers XT*,
XT-286, AT**, Personal System/2* and 6150 RT
Hardware communications controllers and line
adapters, available as standard and optional features on the 9404, provide for
the attachment of public and private communications facilities to the 9404
using modem equipment. Each line adapter is comprised of an adapter card and
communications cable for modem attachment. The line adapters are installed on
the communications controller. Each Six-Line Communications Controller plugs
into an I/O card slot of the 9404 System Unit or System Unit Expansion. The
Multi-Function I/O Processor has an integrated two- line controller function as
a standard feature of the 9404 System Unit.
The number of Six-Line Communications
Controllers that can be installed (D, E, and F models) depends on the number of
I/O card slots available and the following line limitation:
Max
2623
Total Total Max T1/E1/J1
Lines (3) + Max other
Comm Hi Spd < or = 2666 High
Speed
Model Lines Lines 384Kbps 512Kbps
640Kbps (2) Lines (1)
---------- -----
------ ------- ------- -------
----- --------
C10
8 2 0 0 0 0 2
C20/C25
14 2 0 0 0 0 2
Notes:
1. These are
X.21/V.35/ISDN lines which support BSC, X.25,
IDLC and SDLC at speeds greater than
19.2Kbps
up through 64Kbps. An ISDN adapter is
counted as two lines when determining the
number of lines supported.
2. This is the
combined number of #2666 and #2623
features supporting T1/E1/J1 speeds.
3. The Six-Line
Communications Controller (#2623)
supports up to three V.35 SDLC data lines
for
attachment to T1/E1/J1 facilities through
appropriate
Data Communications Equipment (DCE).
Per controller (#2623) support:
- One V.35 SDLC data line operating at
speeds up to 640Kbps
- Two V.35 SDLC data lines operating at
speeds up to 512Kbps
- Three V.35 SDLC data lines operating at
speeds up to 384Kbps
The Multi-Function I/O Processor and one EIA
232/V.24 one-line communications adapter are standard features of the 9404
system unit. In addition to DASD, Diskette, and tape unit, the Multi-Function
I/O Processor supports two communication lines.
The standard EIA 232/V.24 one-line adapter is
provided for use with the IBM electronic customer support facility on the first
communication line. This adapter is equipped with an enhanced cable that
provides attachment to an IBM 5853, 7855, or equivalent modem. The first line
supports switched line facilities operating at 2,400 bps or 9,600 bps using
SDLC protocol. Electronic customer support leased facilities may operate at
speeds up to 19,200 bps on the first line; 9,600 bps using the IBM 7855 modem.
Specify cable length for EIA 232/V.24 adapter standard feature:
A remote power-on capability designed so that
the system can be powered on via a telephone call to the IBM 5853 or 7855
electronic customer support modem is supported only on the first line. V.32
modems other than the IBM 7855 modem have not been tested and may not operate
with the remote power-on capability.
The maximum aggregate data rate of the
Multi-Function I/O Processor for its two communications lines is 21,600 bps for
the D10 and D20 models, and 83,200 bps for the D25 and all E and F models. The
concurrent operation of ASYNC, BSC, SDLC, and X.25 protocols and the X.21 Short
Hold Mode function are supported. ASYNC, BSC, and SDLC line speeds up to 19,200
bps are supported on the D10 and D20 models. X.25 line speeds are supported up
to 9,600 bps on the D10 and D20 models. ASYNC, BSC, and X.25 line speeds up to
19,200 bps are supported on the D25 and all E and F models. SDLC line speeds
are supported up to 64Kbps on the D25 and all E and F models. (Full duplex line
speeds should be doubled for calculating aggregate line speed. X.25 operation
is full duplex. ASYNC operation may be full duplex.)
Optional EIA 232/V.24, V.35 or X.21 one-line
adapters are available (see following descriptions). One optional adapter may
be attached to the standard Multi-Function I/O Processor.
The following MFIOP communications limits
apply to all models:
·
X.25 support:
o
Up to 16 Virtual Circuits
o
Up to 4 controllers (per
line)
(For IBM US, No Longer Available as of July
31, 1996)
The Three-Line Communications Controller
(TLCC) is a special feature for the 9404 B and C model system units and a
supported migration feature on the D, E, and F model system units. It is an
input/output processor that provides the basic control and common circuits for
one, two, or three communication lines. The concurrent operation of ASYNC, BSC,
SDLC, and X.25 protocols; and the SDLC X.21 Short Hold Mode function are
supported. The maximum aggregate data rate for the TLCC is 192,000 bps. Card
slots used: One. Maximum: Four. Two in the System Unit and four with an
Expansion Unit.
(For IBM US, No Longer Available as of March
31, 1999)
The Six-Line Communications Controller is a
special feature of the 9404 D, E and F model system unit and is an input/output
processor that provides the basic control and common circuits for up to six
communication lines. The concurrent operation of ASYNC, BSC SDLC, and X.25
protocols; and the SDLC X.21 Short Hold Mode (SHM) function are supported. A
per controller maximum of ninety-six X.25 virtual circuits is supported with a
maximum of 64 virtual circuits on any line. X.21, V.35, and EIA 232/V.24
adapters are supported. ISDN is also supported but may not attach to a Six-Line
Communications Controller that also contains EIA 232/V.24, X.21, or /V.35
adapters. ISDN lines are full duplex.
One Workstation Adapter (for LocalTalk) is
supported on the Six-Line Communications Controller. A second adapter on the
controller may only be an X.25, EIA 232/V.24 or V.35 communications adapter.
The third adapter position must not be used. X.25 is limited to a maximum of 32
virtual circuits when it shares a Six-Line Communications Controller with a
LocalTalk Workstation Adapter.
Using appropriate Data Communications
Equipment (DCE) which multiplexes one or more V.35 lines onto a T1/J1 line
(1.544Mbps digital link) or E1 line (2.048Mbps digital link), up to three V.35
SDLC data lines per Six-Line Communications Controller are supported for
attachment to T1/E1/J1 DCE.
Per controller support:
EIA 232/V.24, X.21, ISDN adapter type, and
V.35 lines operating BSC or X.25 protocols are not supported for concurrent
operation with V.35 SDLC data lines using T1/E1/J1 DCE on the same controller.
Additional Six-Line Communications Controllers may need to be ordered for V.35
SDLC data lines using T1/E1/J1 DCE.
The aggregate line speed per controller for
non V.35 SDLC data lines using T1/E1/J1 DCE is 384Kbps. (Double full duplex
line speeds when calculating aggregate line speeds. Full duplex is standard for
X.25 lines and may be required for ASYNC lines.)
Card slots used: One. Maximum: See table
below.
System Unit
Expansion Unit Maximum
D Models 2 3 4
E Models 4 5 9
F Models 4 5 9
Maximum number of high speed 48Kbps or greater
lines including V.35 SDLC data line attached to T1/E1/J1 DCE: Four on any D, E,
or F model
(D, E, and F
models only)
Each feature consists of an adapter and cable
used to support one communication line using either ASYNC, BSC, SDLC or X.25
protocol. Line speeds up to 19,200 bps using ASYNC, BSC or SDLC protocol and up
to 9,600 bps using X.25 protocol are supported. This adapter attaches to the
Three-Line Communications Controller (TLCC) or to the Multi-Function I/O
Processor (MFIOP). Card slots used: One on the TLCC, One on the MFIOP. Maximum:
Three on the TLCC, One on the MFIOP. Prerequisite: MFIOP or TLCC.
Select feature number for adapter and required
cable:
(#6154 and #6174 are not recommended for use
with modem equipment that has the "signal quality detect" feature.)
(#6155 and #6175 are recommended for use with
any modem eliminator or a modem that has a feature known as "signal
quality detect" and does not implement CCITT V.54 loop 2 and loop 3 tests
on interface pins 21 and 18.)
(For IBM US, No Longer Available as of July
31, 1996)
This feature consists of an adapter and cable
used to support one communication line using either ASYNC, BSC, SDLC, or X.25
protocol. Line speeds up to 19,200bps are supported. This adapter attaches to
the prerequisite Three-Line Communications Controller (TLCC) (#6150) or the
Multi-Function I/O Processor (MFIOP). The adapter does not use any card slots.
Three adapters are supported on the (TLCC); two on the MFIOP. This feature
cannot be ordered for the 9404 D, E, and F models. One adapter feature and
cable are standard for use with electronic customer support. For cable, specify
either the EIA 232/V.24 Cable (#9022) or the EIA 232/V.24 Enhanced Cable
(#9023). See Specify section of the sales manual for details.
(For IBM US, No Longer Available as of August
31, 1998)
Each feature consists of an adapter and cable
used to attach one communication line to an X.21 or X.25 network. This adapter
attaches to the Multi-Function I/O Processor (MFIOP) or the Three-Line
Communications Controller (TLCC) (#6151). Line speeds up to 19,200 bps using
SDLC protocol and up to 9,600 bps using X.25 protocol are supported on the
MFIOP. Line speeds up to 64Kbps are supported when attached to the TLCC. Card
slots used: None. Maximum: One on the MFIOP, three on the TLCC. Prerequisite:
MFIOP or TLCC (#6150).
Select feature number for adapter and required
cable:
(For IBM US, #2656 No Longer Available as of
August 31, 1998)
This feature consists of an adapter, one
10-foot, two-connector stub cable, and two communication cables used to support
two communication lines to an X.21 or X.25 network. Line speeds up to 64Kbps
are supported using SDLC and X.25 protocols; and the X.21 short hold mode
function. This adapter attaches to the Six-Line Communications Controller. Card
slots used: None. Maximum: Three per controller. Prerequisite: Six-Line
Communications Controller (#2623). Select feature number for adapter and
required cables:
(For IBM US, No Longer Available as of August
31, 1998)
Each feature consists of an adapter and cable
that is used to support one communication line. Line speeds up to 64Kbps using
BSC, SDLC, and X.25 are supported. Speeds up to 640Kbps are supported on the
V.35 adapter for SDLC data lines using T1/E1/J1 DCE when attached to the
Six-line Communications Controller. Maximum high speed (48K to 64Kbps) lines:
Four on any D, E, and F model. One on B and C models. This adapter attaches to
the Six-Line Communications Controller or the TLCC and the MFIOP on the E
models. Card slots used: None. Maximum: Three per controller for E and F
models; one for B, C, and D models. Prerequisite: Six-Line Communications
Controller (#2623) or TLCC (#6150) Select feature number for adapter and
required Cable:
Using appropriate T1/E1/J1 Data Communication
Equipment (DCE) (multiplexor or DSU/CSU), the Six-Line Communications
Controller (#2623) with attached V.35 One-Line adapters (#6153, #6173) supports
SDLC data lines at speeds up to:
Using appropriate Data Communications
Equipment, the MFIOP and the Six-Line Communications Controller(#2623) with
attached V.35 One-Line Adapters(#6153 and #6173) supports switched line SDLC
capability at speeds up to 64Kbps. This support is available with Version 3
Release 1 of OS/400.
(For IBM US, No Longer Available as of March
31, 1999)
This feature consists of an adapter card and
20 foot cable used to attach the system to an ISDN network. Each adapter
supports two 64Kbps 'B' channels and one 16Kbps 'D' channel. ISDN lines are
full duplex. This adapter attaches to the prerequisite Six-line Communications
Controller.
Attachment of X.25 Packet Switched Networks is
also supported using an ISDN B channel as the access facility. The AS/400 will
support two X.25 network access types:
Up to 4096 byte packets are supported.
Two #2605 features may be attached per #2623
Six-Line Communications Controller. The IDLC protocol is supported. This adapter
may not attach to a Six-Line Communications Controller that also attaches EIA
232/V.24, X.21, or V.35 adapters. Refer to "AS/400 Communications:
Integrated Services Digital Network Guide Version 2.0" (SC41-0003) for
additional information. This feature is supported on the 9404 D, E, and F
models only.
(For IBM US, No Longer Available as of August
31, 1998)
This feature provides the AS/400 system with
one communications port capable of T1/J1 (1.544Mbps) or E1 (2.048Mbps) speeds.
Communication over public or private Frame Relay or X.25 Networks or over
point-to- point non-switched SDLC lines is possible. Feature #2666 consists of
a card, a wrap connector and Licensed Internal Code. Three physical interface
types are offered for connection to external Data Communications Equipment
(DCE) such as Data Service Units (DSU), Channel Service Units (CSU) or
multiplexers, which in turn provide connection to the communication facilities.
The physical interfaces are:
The cable type plugged into the adapter and
OS/400 configuration parameters determine which of the three interfaces will be
used. One of the following cables must be specified when ordering feature
#2666:
Note 1: Use of this 24.4 meter (80 foot) V.35
cable restricts the maximum line speed to 64Kbps.
Note 2: Use of these longer cables requires
that the attaching Data Communications Equipment (DCE) support the V.36
transmitter signal element timing Data Terminal Equipment (DTE) source signal.
If, after initial installation a change of
interface type or cable length is desired, a separate cable may be ordered.
The High Speed Communications Adapter supports
Frame Relay, X.25 or SDLC protocols. The specific protocol to be used is
selected by OS/400 configuration commands. The Frame Relay, X.25 or SDLC code
is then loaded into the adapter when the line is enabled.
The Frame Relay code load supports up to 256
permanent virtual circuits on the 9406, through one physical port. The virtual
circuits can be individually configured for the following types of connections:
Logical Link Control (LLC) IEEE 802.2/ISO
8802.2 Type I (connectionless) and Type II (connection-oriented) services,
provided by the Frame Relay code, allow TCP/IP and SNA sessions over these
connections. Source Route Bridging function allows products on a remote
Token-Ring, FDDI or SDDI LAN to communicate with the AS/400 through a remote bridge.
Transparent Bridging is employed for the remote Ethernet and IEEE 802.3 LAN
connections. AS/400 feature #2666 interoperates with IBM RouteXpander/2 and the
IBM 6611 Network Processor for bridged connections to remote Token-Ring LANs.
Interoperation with the IBM 6611 also provides a bridged connection to remote
IEEE 802.3 and Ethernet Version 2 LANs. TCP/IP Forum RFC 1490 (Request For
Comment - Multiprotocol Connect over Frame Relay) defines the industry standard
formats used to facilitate this bridged interoperation. Support of these
formats allows the High Speed Communications Adapter to also interoperate with
other industry standard bridges.
Frame Relay Standards: Frame Relay functions
of the High Speed Communications Adapter feature are implemented in accordance
with these standards:
The SDLC code load supports non-switched
communications over any of the three possible interfaces (V.35, V.36/EIA 449 or
X.21).
The X.25 code load supports up to 64 virtual
circuits over any of the three possible interfaces (V.35, V.36/EIA 449 or
X.21).
Frame Relay and SDLC functions require OS/400
Version 2 Release 3 or later. X.25 function requires OS/400 Version 3 Release 1
or later. I/O Card Slots Used: One. Maximums: Two on Models D10, D20, D25, E10,
E20, E25, F10 and F20. Four on Model F25.
Refer to IBM publication SC41-0004 "IBM
Application System/400 Communications: Local Area Network Guide", for an
introduction to Frame Relay, AS/400 implementation, Configurations, addressing
considerations, interfaces and Frame Relay examples.
(For IBM US, No Longer Available as of August
31, 1998)
This feature provides one interface to connect
an AS/400 System to an FDDI LAN which complies with ANSI X3T9.5 and ISO 9314
standards. Feature #2618 consists of a card, a wrap connector and Licensed
Internal Code which supplies IEEE 802.2 Logical Link Control (LLC), ANSI
X3T9.5/ISO 9314 Media Access Control (MAC) functions, and ANSI X3T9.5 Station
Management (SMT) functions (draft version 7.2 level which is compatible with
version 6.2). OS/400 configuration parameters are used to select whether the
adapter operates as a Single Attach Station (SAS), a Dual Attach Station (DAS)
or a dual-homing station. An interface is provided which can be used to connect
through and control an optical bypass switch. A maximum frame size of 4K bytes
is supported. OS/400 Version 2 Release 3 or later is required, which provides
support for SNA communications.
Refer to IBM publication GA27-3892, "IBM
FDDI Network Introduction and Planning Guide", for an introduction to FDDI
concepts, descriptions of IBM FDDI components and information for planning and
installing IBM FDDI networks on optical fiber media.
I/O Card Slots Used: One. Maximums: One on
Models D10, D20, D25, E10, E20, E25, F10, F20, and F25. Refer to 9404 LAN
Feature Summary Chart.
Cables: The FDDI Adapter requires multi-mode
(62.5/125 micron) FDDI optical fiber jumper cables to connect the adapter into
the FDDI ring. These jumper cables are not provided with this feature. Jumper
cables are the responsibility of the customer and may be ordered from your
local authorized IBM cabling distributor. For more information about the jumper
cables, planning, design, and installation of optical fiber cabling systems,
refer to IBM publication GA27-3943, "IBM Cabling System Optical Fiber
Installation and Planning Guide."
(For IBM US, No Longer Available as of July 1,
1997)
(This feature cannot be ordered until March 30,
1993.)
This feature provides one interface to connect
an AS/400 System to an FDDI LAN which is constructed of IBM Cabling System Type
1, 2, 6, or 9 shielded twisted-pair wiring. Feature #2665 consists of a card, a
wrap connector and Licensed Internal Code which supplies IEEE 802.2 Logical
Link Control (LLC), ANSI X3T9.5/ISO 9314 Media Access Control (MAC) functions,
and ANSI X3T9.5 Station Management (SMT) functions (draft version 7.2 level
which is compatible with version 6.2). OS/400 configuration parameters are used
to select whether the adapter operates as a Single Attach Station (SAS), a Dual
Attach Station (DAS) or a dual- homing station. A maximum frame size of 4K
bytes is supported. OS/400 Version 2 Release 3 or later is required, which
provides support for SNA communications.
Refer to IBM publication GA27-3892, "IBM
FDDI Network Introduction and Planning Guide", for an introduction to FDDI
concepts, descriptions of IBM FDDI components and information for planning and
installing IBM FDDI networks on shielded twisted-pair copper media.
I/O Card Slots Used: One. Maximums: One on
Models D10, D20, D25, E10, E20, E25, F10, F20, and F25. Refer to 9404 LAN
Feature Summary Chart.
Cables: The SDDI Adapter requires IBM FDDI
copper jumper cables to connect the adapter into the FDDI ring. These jumper
cables are not provided with this feature. Jumper cables are the responsibility
of the customer and may be ordered from your local authorized IBM cabling
distributor. For more information about the jumper cables, planning, design,
and installation of FDDI networks, refer to IBM publication GA27-3892,
"IBM FDDI Network Introduction and Planning Guide."
(For IBM US, No Longer Available as of March
31, 1999)
The 16/4Mbps Token-Ring Network Adapter/HP
feature provides a single attachment to either a 16Mbps or a 4Mbps IBM
Token-Ring Network. The feature consists of an adapter card, internal code
which supplies IEEE 802.5 Media Access Control (MAC) and IEEE 802.2 Logical
Link Control (LLC) functions, and an external 2.5 meter (8 foot) cable. The
standard IBM Cabling System patch cables can increase the length where
necessary.
OS/400 configuration parameters are used to
select either the 16 or 4Mbps rate. Early token release can be enabled or
disabled when the 16Mbps rate is selected. These controls allow the customer to
easily migrate from a 4 to a 16Mbps Token-Ring Network.
Feature #2619 is functionally equivalent to
feature #2626. Feature #2619 is based on a faster microprocessor, providing up
to three times the throughput of feature #2626. A maximum frame size of up to
16K bytes is supported. Support of OS/400 Version 2 Release 2 or later is
required.
I/O Card Slots Used: One. Maximums: Two on the
D models (one in the system unit and one in the expansion unit) and two on the
Models E10, F10 and E20 (one or two in the system unit and one or two in the
expansion unit to a maximum of two). Three on the Model E25 (one or two in the
system unit and one or two in the expansion unit to a maximum of three). Four
on the Models F20 and F25 (one or two in the system unit and one or two in the
expansion unit to a maximum of four). Refer to the LAN Feature Summary table.
Cables: One Token-Ring Network attachment 2.5
meter (8-foot) cable.
(For IBM US, No Longer Available as of July 1,
1997)
The 16/4Mbps Token-Ring Network Adapter/A
feature provides a single attachment to either a 16Mbps or a 4Mbps IBM
Token-Ring Network for 9404 D, E, and F models . The feature consists of an
adapter card, internal code which supplies IEEE 802.5 Media Access Control
(MAC) and IEEE 802.2 Logical Link Control (LLC) functions, and an external 2.5
meter (8 foot) cable. The standard IBM Cabling System patch cables can increase
the length where necessary.
OS/400 configuration parameters are used to
select either the 16 or 4Mbps rate. Early token release can be enabled or
disabled when the 16Mbps rate is selected. These controls allow the customer to
easily migrate from a 4 to a 16Mbps Token-Ring Network.
Feature #2626 is functionally equivalent to
feature #2636. Feature #2626 is based on a faster microprocessor, providing up
to two times the throughput of feature #2636. A maximum frame size of up to 16K
bytes is supported.
I/O Card Slots Used: One. Maximums: Two on the
D models (one in the system unit and one in the expansion unit) and two on the
Models E10, F10 and E20 (one or two in the system unit and one or two in the
expansion unit to a maximum of two). Three on the Model E25 (one or two in the
system unit and one or two in the expansion unit to a maximum of three). Four
on the Models F20 and F25 (one or two in the system unit and one or two in the
expansion unit to a maximum of four). Refer to the LAN Feature Summary table.
Cables: One Token-Ring Network attachment 2.5
meter (8-foot) cable.
The 16/4Mbps Token-Ring Network Adapter
feature provides a single attachment to a 16Mbps or a 4Mbps IBM Token-Ring
Network. The feature consists of an adapter card, internal code which supplies
IEEE 802.5 Media Access Control (MAC) and IEEE 802.2 Logical Link Control (LLC)
functions, and an external 2.5 meter (8 foot) cable. The standard IBM Cabling
System can increase the length where necessary.
OS/400 configuration parameters are used to
select either the 16Mbps or 4Mbps rate. Early Token Release can be enabled or
disabled when the 16Mbps rate is selected. These controls allow the customer to
easily migrate from a 4 to a 16Mbps IBM Token-Ring Network.
Feature #2636 is based on the same
microprocessor as feature #6160. The adapter (#2636) supports a maximum frame
size of up to 8KB. This increased frame size, along with other changes to the
licensed internal code, provide improved performance during large file transfer
operations. Short interactive workstation exchanges will see little response
time improvement over the 4Mbps IBM Token-Ring Network Adapter (#6160).
I/O Card Slots Used: One. Maximums: Two on the
D models (one in the system unit and one in the expansion unit) and two on the
Models E10, F10 and E20 (one or two in the system unit and one or two in the
expansion unit to a maximum of two). Three on the Model E25 (one or two in the
system unit and one or two in the expansion unit to a maximum of three). Four
on the Models F20 and F25 (one or two in the system unit and one or two in the
expansion unit to a maximum of four). Refer to the LAN Feature Summary table.
Cables: One Token-Ring Network attachment 2.5
meter (8-foot) cable.
(Withdrawn from marketing)
The IBM Token-Ring Network Adapter feature
provides a single attachment to a 4Mbps IBM Token-Ring Network. The feature
consists of an adapter card, internal code which supplies IEEE 802.5 Media
Access Control (MAC) and IEEE 802.2 Logical Link Control (LLC) functions, and
an external 2.5 meter (8 foot) cable. The standard IBM Cabling System patch
cables can increase the length where necessary. This adapter supports a maximum
frame size of 2K bytes. This feature is supported on the D models as part of an
upgrade but is not orderable as a new feature.
I/O Card Slots Used: One. Maximums: Two (one
in the system unit and one in the Expansion Unit). Cables: One Token-Ring
Network attachment 2.5 meter (8-foot) cable.
(For IBM US, No Longer Available as of March
31, 1999)
The Ethernet/IEEE 802.3 Adapter/HP provides a
single attachment to one Carrier Sense Multiple Access/Collision Detect Local
Area Network. Feature #2617 offers enhanced performance and additional function
when compared to feature #2625. This High Performance adapter uses a faster
microprocessor and additional memory to provide up to six times the throughput
of feature #2625. Support of OS/400 Version 2 Release 2 or later required.
A 15-pin "D" connector provides a
standard Attachment Unit Interface (AUI) for connection through an external
transceiver. Transceivers which attach to 10Base-T (unshielded twisted pair),
10Base-2 (Thin Ethernet), and standard Ethernet coaxial media can be obtained
from an Ethernet supplier.
The feature consists of an adapter card and
internal code which supplies Ethernet version 2 and IEEE 802.3 Media Access
Control (MAC) plus IEEE 802.2 Logical Link Control (LLC) functions. This
adapter offers the customer a connection to Ethernet/IEEE 802.3 LANs, which
support communications with both IBM and non-IBM products. Concurrent sessions
with both Ethernet Version 2 and IEEE 802.3 stations are possible. These two
CSMA/CD protocols are able to coexist on the same LAN but they can not
communicate with each other. This concurrent session capability of feature
#2617 allows the 9404 to support a customer's staged migration from Ethernet
Version 2 to the newer IEEE/802.3 LAN.
I/O Card Slots Used: One. Maximums: Two on the
D models (one in the system unit and one in the expansion unit) and two on the
Models E10, F10 and E20 (one or two in the system unit and one or two in the
expansion unit to a maximum of two). Three on the Model E25 (one or two in the
system unit and one or two in the expansion unit to a maximum of three). Four
on the Models F20 and F25 (one or two in the system unit and one or two in the
expansion unit to a maximum of four). Refer to the LAN Feature Summary table.
Cables: The customer must procure the
Attachment Unit Interface (AUI) cable which connects between the adapter and
the Ethernet/IEEE 802.3 transceiver. This cable and the transceiver are not
available from IBM, but can be obtained from an Ethernet supplier.
(For IBM US, No Longer Available as of January
24, 1996)
The Ethernet/IEEE 802.3 CSMA/CD LAN Adapter
feature provides a single attachment to one Carrier Sense Multiple
Access/Collision Detect Local Area Network. The feature consists of an adapter
card and internal code which supplies Ethernet Version 2 and IEEE 802.3 Media
Access Control (MAC) plus IEEE 802.2 Logical Link Control (LLC) functions. This
adapter offers the customer a connection to Ethernet/IEEE 802.3 LANs, which
support communications with both OEM and IBM products. Concurrent sessions with
both Ethernet Version 2 and IEEE 802.3 stations are possible. These two CSMA/CD
protocols are able to coexist on the same LAN but they can not communicate with
each other. This concurrent session capability of feature #2625 allows the 9404
to support a customer's staged migration from Ethernet Version 2 to the newer
IEEE/802.3 LAN.
I/O Card Slots Used: One. Maximums: Two on the
D models (one in the system unit and one in the expansion unit) and two on the
Models E10, F10 and E20 (one or two in the system unit and one or two in the
expansion unit to a maximum of two). Three on the Model E25 (one or two in the
system unit and one or two in the expansion unit to a maximum of three). Four
on the Models F20 and F25 (one or two in the system unit and one or two in the
expansion unit to a maximum of four). Refer to the LAN Feature Summary table.
Cables: The customer must procure the
Attachment Unit Interface (AUI) cable which connects between feature #2625 and
the Ethernet/IEEE 802.3 transceiver. The AUI cable is not available from IBM,
but can be obtained from an Ethernet supplier.
(For IBM US, No Longer Available as of August
31, 1998)
This feature provides the communications
hardware base for the AS/400 Wireless LAN Adapter (#2668). The two features are
integrated in a single hardware package to operate as a unit. Feature #2663
consists of a new I/O processor card that provides a connection to feature
#2668. Operating System/400 Version 3 Release 1, or later, is required.
The I/O Attachment Processor is attached to
AS/400 systems as a prerequisite for feature #2668. Refer to feature #2668 for
usage guidelines and maximums.
I/O card slots required: One (shared with
feature #2668).
Maximums: Refer to 9404 LAN Feature Summary
table
(For IBM US, No Longer Available as of
December 31, 1999)
This feature provides the AS/400 with two ports
capable of transmission and receipt of facsimile data to or from a Group 3
capable fax machine, another AS/400 with an Integrated Fax Adapter, or PCs with
appropriately programmed fax adapters. Feature #2664 consists of a card, a wrap
cable (one per machine), two country-unique attachment couplers, telephone
cables and Licensed Internal Code.
The Integrated Fax Adapter is supported by the
Facsimile Support/400* licensed program offering that, until now, supported
only the PS/2 LAN-based facsimile product. This program provides configuration
parameters for the Integrated Fax Adapter, schedules fax transmissions between
multiple adapters, and manages sending and receiving faxes to and from the
adapter.
The Integrated Fax Adapter can simultaneously
support two send, two receive, or one send and one receive operation. To the
AS/400 system, the Integrated Fax Adapter appears as an IPDS* (Intelligent
Printer Data Stream) printer for outbound faxes. Most output, including text,
image, graphics and bar codes that can be printed on an AS/400 IPDS printer can
be faxed via the Integrated Fax Adapter. Double Byte Character Sets (DBCS) are
supported for in-bound faxes, but not for out-bound faxes.
The Integrated Fax Adapter is designed to be
directly attached to the Public Switched Telephone Network (PSTN). Attachment
to a Private Branch Exchange (PBX) may give unsatisfactory results.
Feature #2664 supports the facsimile protocols
defined in CCITT Blue Book Volume VII, Fasicle VII.3 Recommendations T.4 and
T.30.
Documents transmitted from the AS/400 through
the Integrated Fax Adapter are limited to a maximum of approximately 30 text
pages per port, per phone call. If only a single port is configured for sending
Fax documents, then the limit is raised to approximately 60 text pages.
Resident cover pages are counted against this limit. Feature #2664 supports the
following compression algorithms in fax mode:
Feature #2664 supports the following modem
standards:
Initial country support includes: USA, Canada,
France, United Kingdom, Germany, Italy, Japan and Sweden. Country support is
subject to approval by that country. Two country-unique couplers and country-
specific Public Switched Telephone Network (PSTN) attachment cables (one for
each port), are required. The couplers and cables are included with the
Integrated Fax Adapter feature.
OS/400 Version 3 Release 0.5, or later, and
Facsimile Support/400 Version 3 Release 0.5, or later, or OS/400 Version 2
Release 3 and Facsimile Support/400 Version 2 Release 3, with PRPQ P84237
(5799-XBX) are required to support this feature.
Card slots used: One Maximum: Refer to System
Unit Summary.
(For IBM US, No Longer Available as of August
31, 1998)
The AS/400 Wireless LAN Adapter provides
wireless connectivity from AS/400 systems to workstations or other systems
connected to a wireless LAN network. With a wireless LAN connection, end-users
can have roaming, portable access to the information they need, wherever they
are, within the area of local wireless radio coverage. In addition, the AS/400
Wireless LAN Adapter may be the preferred solution in situations where wiring
is expensive or impossible or where computing resource and device layouts
change periodically. Support is provided for portable and stationary PCs, for
specialized hand-held devices used for data collection, and for connections
between AS/400 systems.
The AS/400 Wireless LAN Adapter uses an
advanced technology, direct sequence, spread-spectrum radio operating in the
2.4 to 2.4835GHz band. The operating band may be narrower in some countries to
meet country regulations. Spread spectrum provides excellent resistance to
interference from other radio frequency (RF) sources.
Availability of this feature in any particular
country is dependent on current country radio frequency regulations and
certification for use by the country.
The AS/400 Wireless LAN Adapter has not been
approved by the Federal Communications Commission. This device is not, and may
not be offered for sale or lease, or sold or leased until the approval of the
FCC has been obtained.
Operation in the United States does not
require a license from the Federal Communications Commission.
The AS/400 Wireless LAN Adapter comes with an
antenna and a cable for connecting the antenna to the adapter. The area of
coverage may be extended beyond the coverage provided by the antenna attached
to the adapter by adding AS/400 Wireless LAN Access Points to the network via
an unshielded twisted-pair wired backbone. In addition, access points may be
connected without wires, acting as wireless repeaters. Each adapter or access
point generates one cell of coverage area. Networks are designed to create
overlapping cells to ensure consistent coverage of the area desired. The AS/400
Wireless LAN Adapter allows transparent seamless movement from cell to cell
while maintaining a continuous host session. A site survey by trained
professionals is recommended to assist in network design.
The AS/400 Wireless LAN Adapter operates with
existing application software interfaces. Existing 5250 and LAN-oriented
applications can use the AS/400 Wireless LAN Adapter without change.
The AS/400 Wireless LAN Adapter supports the
AS/400 family of wireless LAN and data collection devices. This family of
devices provides comprehensive connectivity solutions for attaching personal
computers and data collection devices to the AS/400 in a mobile, wireless
fashion. The AS/400 Wireless LAN Adapter also operates with the DATASPAN**
2.4GHz family of products from the Telxon Corporation. In addition to the
AS/400 Wireless LAN Adapter, the following AS/400 wireless LAN networking
devices are available from IBM:
The raw bit rate for the AS/400 Wireless LAN
Adapter is 2Mbps, shared by all active devices in the network. The range
covered by one cell in most office environments is from 100 to 300 feet in all
directions, depending on the building structure, antenna type and antenna
placement. Outdoors, with a clear line-of-sight between specialized antennas, a
range of up to three miles may be achieved.
This feature consists of an I/O adapter card,
an antenna and a coaxial cable to attach the antenna. The following cable and
antenna choices are offered:
·
One of the following:
o
#9814 - 20-Foot Antenna
Cable (For IBM US, No Longer Available as of August 31, 1998)
o
#9815 - 50-Foot Antenna
Cable (For IBM US, No Longer Available as of August 31, 1998)
Feature #2663, I/O Attachment Processor, is a
prerequisite to this feature. Support in OS/400 Version 3 Release 1, or later
is required. I/O card slots used: One (shared with Feature #2663). Maximum per
system: Refer to 9404 LAN Feature Summary table for feature # 2663.
(For IBM US, No Longer Available as of May 31,
2001)
The 16/4Mbps Token-Ring IOA feature provides a
single attachment to either a 16Mbps or a 4Mbps IBM Token-Ring network. The
feature consists of an IOA card, internal code which supplies IEEE 802.5 Media
Access Control (MAC) and IEEE 802.2 Logical Link Control (LLC) functions. The
16/4 Token-Ring IOA can operate in half-or full-duplex mode.
#6149 and #9249 come with a 2.44-meter
(8-foot) token-ring cable. Alternatively, a customer supplied twisted-pair
cable can attach to the RJ45 connection on the IOA. The standard IBM Cabling
System patch cables can increase the length where necessary. This feature
attaches only to the Integrated PC Server (#6616).
(For IBM US, No Longer Available as of July
31, 2001)
The Ethernet/IEEE 802.3 IOA provides a single
attachment to one Carrier Sense Multiple Access/Collision Detect LAN. The
feature consists of an adapter card and internal code that supplies Ethernet
version 2 and IEEE 802.3 Media Access Control (MAC) plus IEEE 802.2 LLC
functions. The Ethernet/IEEE 802.3 IOA can operate half-or full-duplex mode.
#6181 and #9381 have a RJ45 connector and a
15-pin D-Shell connector for attachment to customer-supplied RJ45 twisted-pair
cable or AUI Ethernet cable. This feature attaches only to the Integrated PC
Server (#6616).
The File Server I/O Processor (FSIOP), along
with supporting AS/400 software, provides a high performance, client-centered
file system. This file system provides access to client platforms such as OS/2,
Windows and DOS attached to Token-Ring and Ethernet LANs. The file system can
also be accessed by AS/400 host applications and provide LAN communications to
AS/400 applications using TCP/IP and APPN.
The FSIOP can leverage OS/2 LAN server
implementations to provide fast file serving performance on LANs. PC file
serving performance on the AS/400 is increased up to eight times over previous
AS/400 offerings.
The FSIOP consists of various initial order
configurations that can be upgraded in the field using separate memory and
second-port upgrade features. The following initial configuration features can
be ordered on select 9404 D, E and F models:
The following features are available for
upgrading the capability of File Server I/O Processors:
·
#6509 - Additional 16MB
FSIOP Memory: From one to three features may be installed up to the FSIOP
memory maximum of 64MB.
Each LAN port can be configured to support one
of the following interfaces:
Protocol Connector Media
--------------------
-------------
---------------
4/16Mbps Token-Ring 9-pin D-Shell STP
4/16Mbps Token-Ring RJ45 UTP
10Mbps Ethernet 15-pin D-Shell
10Base5 / AUI
10Mbps Ethernet 15-pin D-Shell
10Base2 / External
Transceiver
10Mbps Ethernet RJ45
10BaseT
Cables: One or two of the following LAN cables
are included with the FSIOP and should be specified when ordering. One cable is
included with a One-Port FSIOP and upgrade feature #6520. Two cables are
included with the Two-Port FSIOPs. (Note: If using the RJ45 connection, a
specify cable is not required.)
The File Server I/O Processor features require
the support of OS/400 Version 3 Release 1.0, or later. Each FSIOP feature also
requires the licensed program, LAN Server/400 (5763-XZ1).
The maximum number of FSIOP features that may
be installed on the AS/400 is four, subject to the maximum number of LANs
allowed on the system. The maximum is the aggregate number of all types of
LANs. The Two-Port FSIOP is counted as two LANs. Card slots required: Two
(For IBM US, No Longer Available as of March
31, 1999)
The Integrated PC Server is the next step in
the evolution of the file serving IOP family. It contains a 166MHz Pentium
processor, two IOP memory card slots, and two LAN IOA slots.
Each IOP memory slot can contain either a 32MB
or a 128MB card, producing a range of IOP memory capacity from 32MB up to
256MB. At least one IOP memory feature card is required. The IOP memory feature
cards are:
Each LAN IOA slot can contain either a
Token-Ring IOA or an Ethernet IOA. At least one LAN IOA feature is required.
The Integrated PC Server is capable of supporting two IOAs in any combination.
The features for the LAN IOAs are:
Prerequisites: At least one memory feature
(either #2861 or #2862) and at least one LAN feature (either #6149 Token-Ring,
#6181 Ethernet). Requires OS/400 V3R2 with OS/400 no-charge feature #1978, V3R2
Integrated PC Server Support for AS/400.
Novell NetWare V4.1, Lotus Notes 4.1, and
FlowMark V2.3 are supported on the new Integrated PC Servers (features #2850
and #6616).
Lotus Domino (Notes Server) 4.5 will be
supported on the Integrated PC Servers beginning May 2, 1997. AS/400 support
for Domino will include a simplified installation procedure in addition to the
new function that Domino provides.
LAN Server for AS/400 is currently not
supported on the new Integrated PC Servers (Features #2850 and #6616).
Maximums: Refer to 9404 LAN Feature Summary
table.
----------------------------------------------------------
| 9404 System LAN Feature Summary |
|----------------------------------------------------------|
| LAN Feature Number |
-------|----------------------------------------------------------|
|System | |
| |2663| |
| | | | |Maximum|
| Model
|2618|2665|FSIOP|2668|2619|2626|2636|6160|2625|2617| LANs |
|-------|----|----|-----|----|----|----|----|----|----|----|-------|
| C10
| | | | |
| | F | F | F
| | 1 |
|-------| |
| | | | |
| | | | |
| C20
| | | | |
| | F | F
| F | | 2 |
|-------| |
| | | | |
| | | | |
| C25
| | | | |
| | F | F
| F | | 2 |
------------------------------------------------------------------
Notes:
The 9404 D, E and F model communications
controllers and line adapters support a variety of protocols and line types:
·
Switched and nonswitched
point-to-point and multipoint lines are supported. X.25 lines are full duplex.
ASYNC lines can be full or half duplex.
o
X.21 SHM/MPS concurrent
operation is supported for any combination of up to six lines per port group
and up to six port groups with BSC, ASYNC, SDLC, and X.25 lines by the Six-line
Communications Controller.
Attachment to an X.25
network via an X.25 auto-dial switched line is also supported.
See 2700 Charts P
and Q in Sales Manual pages for a list of supported networks. X.25 guidelines
are:
o
X.25 circuits can be
permanent or switched virtual circuits.
The ISDN Basic Rate
Interface Adapter (#2605) will provide the capability to attach to voice/data
transmission services having interfaces complying with the IBM ISDN
architecture which interprets Recommendation ISDN (1988) of the International
Telegraph and Telephone Consultative Committee (CCITT). This interface support
will be in conformance with the functional description contained in
"Integrated Services Digital Networks Data Link Control - Architecture
Reference" (SC31-6826), and Integrated Services Digital "Networks
Circuit-Switching Signalling Control - Architecture Reference",
(SC31-6827). This ISDN feature supports attachment to the following switches:
Version 2 Release 3
of OS/400 adds support for what is commonly called National ISDN. The Basic
Rate Interface Adapter (#2605) now also provides the capability to attach to
voice/data transmission services which comply with the guidelines specified in
the following Bellcore documents:
4.
Generic Guidelines for
ISDN Terminal Equipment on Basic Access Interfaces; Special Report
SR-NWT-001953
5.
Generic
Guidelines for ISDN Terminal Equipment on National ISDN-2 Basic Rate
Interfaces; Special Report SR-NWT-002361
OS/400
configuration parameters are used to select the Basic Rate Interface Adapter
operation which is compatible with the ISDN transmission services being used.
Announcement of
attachment capability for other ISDN switches, or given release levels of these
switches, will depend on network availability and IBM's characterization of the
network interface. Selection of additional ISDN networks for attachment will be
based upon IBM's technical and business judgement in addressing the
requirements of its customers. If network suppliers require certification of
this feature, it is the responsibility of the customer or the network supplier
to obtain this certification.
This adapter allows
communications via ISDN/IDLC with the following:
o
Other similarly equipped
AS/400 systems
Attachment of X.25
Packet Switched Networks is also supported using an ISDN B channel as the
access facility. The AS/400 will support two X.25 network access types:
Note: When using the ISDN Basic Rate Interface Adapter
(#2605), communications with other systems equipped with the IBM ISDN 7820 is
not supported if these systems do not support IDLC or X.25 protocols (either
natively or through a protocol converter box).
Using appropriate
T1/E1/J1 DCE (multiplexor or DSU/CSU), the 9404 Six-line communications
controller (#2623) with attached V.35 one-line adapters (#6153-6173) supports
SDLC data lines at speeds up to:
Two Six-line
Communications Controllers configured for T1/E1/J1 DCE attachment are supported
for 9404 D, E, and F models.
·
·
Protocol 232/V.24
V.35 X.21 I.430
449/V.36
·
ASYNC 19.2 * * *
*
·
BSC 19.2 64.0 * *
*
·
SDLC 19.2 2048 2048 *
2048
·
X.25 19.2 640.0 640.0 *
640.0
·
IDLC * * *
64.0 NA
·
Frame Relay *
2048 2048 *
2048
·
* Not applicable
·
Note: Not all maximum speeds are supported on all features.
Refer to specific feature descriptions for any limitations.
The following
guidelines apply to the communication features on IBM 9404 B and C model
systems:
o
All Models can support
one Multiple Function IOP, one LAN adapter, and one or two Three-Line
Communications Controllers, concurrently. A Model B20/C20/C25 with the
expansion unit can support one Multiple Function IOP, one or two LAN Adapters,
and one to four Three-Line Communications Controllers, concurrently.
Some X.21 SHM/MPS
guidelines are:
§
A maximum of one port per
port group is supported per Multi-Function I/O processor.
§
One X.25 line supporting
up to sixteen X.25 virtual circuits may operate concurrently with a one-line or
a two-line X.21 SHM/MPS port group on the 9404 three-line communications
adapter.
Some X.25
guidelines are:
§
A maximum of six X.25
lines are supported on the 9404
| BXX | CXX | DXX |Required
Feat | PXX | TXX | | OS/400
Code Price File Name |10 20|10 20 25|10 20 25|Release
---- ---------------------------- |-- --|-- -- --|-- -- --|--------1101 Battery Power Unit |MR MR|MR MR MR|MR MR MR|V1R1
2600 Magnetic Storage Controller |MR MR|MR MR MR|SR SR SR|V1R3
2605 ISDN Basic Rate Adapter | | |MR MR MR|V2R1
2617 Ethernet/IEEE 802.3 CSMA/CD | | |MR MR MR|V2R2
2618 Fiber Distributed Data Adpt | | |MR MR MR|V2R3
2619 16/4 Mbps Token-Ring Adapter | | |MR MR MR|V2R2
2620 Cryptographic Processor(Full)| | |MR MR MR|V2R3
2628 Cryptographic PROC(Limited) | | |MR MR MR|V2R3
2621 Removable Media Device Attch |MR MR|MR MR MR|MR MR MR|V2R12622 3490 Magnetic Tape Attach |SR SR|SR SR SR|SR SR SR|V2R1
2623 Six Line Comm Controller | | |MR MR MR|V2R1
2624 Storage Device Controller | | |MR MR MR|V2R1
2625 Ethernet/IEEE 802.3 CSMA/CD |MR MR|MR MR MR|MR MR MR|V1R3
2626 16/4 Mbps Token-Ring Adapt/A | | |MR MR MR|V2R1
2636 16/4 Mbps Token-Ring Adapter |MR MR|MR MR MR|MR MR MR|V1R32644 3490 Magnetic Tape Attach |MR MR|MR MR MR|MR MR MR|V2R3
2647 9348 Model 2 Tape Attachment |MR MR|MR MR MR|SR SR SR|V1R32654 EIA 232/V.24 Two-Line 20E | | |MR MR MR|V2R1
2655 EIA 232/V.24 Two-Line 20 | | |MR MR MR|V2R1
2656 X.21 Two-Line 20 | | |MR MR MR|V2R1
2657 EIA 232/V.24 Two-Line 50E | | |MR MR MR|V2R1
2658 EIA 232/V.24 Two-Line 50 | | |MR MR MR|V2R1
2659 X.21 Two-line 50 | | |MR MR MR|V2R1
2663 I/O Attachment Processor | | |MR MR MR|V3R1
2664 Integrated Facsimile Attach | | |MR MR MR|V2R3
2665 Copper Dist Data Interface | | |MR MR MR|V2R3
2666 Frame Relay Adapter | | |MR MR MR|V2R3
2668 AS/400 Wireless LAN Adapter | | |MR MR MR|V3R1
2861 32MB IOP Memory | | |MR MR MR|V3R2
2862 128MB IOP Memory | | |MR MR MR|V3R2
3108 8MB Main Storage | | MR| MR |V1R2
3120 8MB Main Storage | | | MR|V2R1
3121 8MB Main Storage Expansion | | | MR|V2R1
3122 32MB Main Storage | | | MR|V2R1
4104 4MB Main Storage |MR MR|MR MR MR|MR MR |V1R1
4114 4MB Main Storage Expansion |MR MR|MR MR MR|MR MR |V1R1
5003 DLSO Pre-Load | | | |
5006 Backup Tape-Preload SW | | | |
5133 Feature Power Supply |MR MR|MR MR MR|MR MR MR|V1R1
6050 Twinaxial Workstn Controller |MR MR|MR MR MR|MR MR MR|V2R26054 LocalTalk Workstn Controller | | |MR MR MR|V2R3
6100 Disk Unit (315MB) |SR SR|SR SR SR|SR SR SR|V1R1
6105 Single Disk Unit (320 MB) |MR MR|MR MR MR|MR MR MR|V1R2.1
6106 Dual Disk Unit (640MB) |MR MR|MR MR MR|MR MR MR|V1R2.1
6107 Single Disk Unit (400 MB) |MR MR|MR MR MR|MR MR MR|V2R1
6108 Addition Dual Disk (640MB) |MR MR|MR MR MR|MR MR MR|V1R3
6109 Single Disk Unit (988MB) | | |MR MR MR|V2R1.1
6120 Dual Disk Unit (800 MB) |MR MR|MR MR MR|MR MR MR|V2R1
6121 Addition Dual Disk (800MB) |MR MR|MR MR MR|MR MR MR|V2R1
6123 Addition Dual Dsk (1976MB) | | |MR MR MR|V2R1.1
| BXX | CXX | DXX |Required
Feat | PXX | TXX | | OS/400
Code Price File Name |10 20|10 20 25|10 20 25|Release
---- ---------------------------- |-- --|-- -- --|-- -- --|--------6124 Base DASD Upgrade (1976MB) | | | M |V2R1.1
6125 Base DASD Replace (988MB) | | | M |V2R1.1
6127 Base DASD Replace (1976MB) | | | M |V2R1.1
6131 Diskette Unit (5 1/4-inch) |MR MR|MR MR MR|MR MR MR|V1R1
6132 Diskette Unit (8-inch) |MR MR|MR MR MR|MR MR MR|V1R1
6137 Diskette Unit (5 1/4-inch) | | |MR MR MR|V2R1
6138 Diskette Unit (8-inch) | | |MR MR MR|V2R1
6140 Twinaxial Workstn Controller |MR MR|MR MR MR|MR MR MR|V1R16141 ASCII Workstation Controller |MR MR|MR MR MR|MR MR MR|V1R16142 ASCII 12 Port Workstn Attach |MR MR|MR MR MR|MR MR MR|V1R16149 16/4Mbps Token-Ring IOA | | |MR MR MR|V3R2
6150 Three-Line Comm Controller |MR MR|MR MR MR|SR SR SR|V1R1
6151 X.21 One-Line 20 |MR MR|MR MR MR|MR MR MR|V1R1
6152 EIA 232/V.24 Adapter |MR MR|MR MR MR|SR SR SR|V1R1
6153 V.35 One-Line 20 |MR MR|MR MR MR|MR MR MR|V1R1
6154 EIA 232/V.24 One-Line 20E | | |MR MR MR|V2R1
6155 EIA 232/V.24 One-Line 20 | | |MR MR MR|V2R1
6160 Token-Ring Network Adapter |SR SR|SR SR SR|SR SR SR|V1R1
6171 X.21 One-line 50 | | |MR MR MR|V2R1
6173 V.35 One-Line 50 | | |MR MR MR|V2R1
6174 EIA 232/V.24 One-Line 50E | | |MR MR MR|V2R1
6175 EIA 232/V.24 One-Line 50 | | |MR MR MR|V2R1
6181 Ethernet/IEEE 802.3 IOA | | |MR MR MR|V3R2
6346 120MB 1/4-in Cartridge Tape | MR| MR MR|SR SR SR|V1R1
6347 525MB 1/4-in Cartridge Tape | MR| MR MR|MR MR MR|V2R1
6348 1.2GB 1/4-in Cart Tape | | | MR|V2R2
6349 2.5GB 1/4-in Cart Tape | | | MR|V3R0.5
6501 3490 Magnetic tape Attach | | |MR MR MR|V2R3
6509 Addl 16MB SIMMS for FSIOP | | |MR MR MR|V3R1
6516 File Server, 16MB 1 Port LAN | | |MR MR MR|V3R1
6517 File Server, 32MB 1 Port LAN | | |MR MR MR|V3R1
6518 File Server, 48MB 1 Port LAN | | |MR MR MR|V3R1
6519 File Server, 64MB 1 Port LAN | | |MR MR MR|V3R1
6520 Upgr 1 Port FSIOP to 2 Port | | | |V3R1
6526 File Server, 16MB 2 Port LAN | | | |V3R1
6527 File Server, 32MB 2 Port LAN | | | |V3R1
6528 File Server, 48MB 2 Port LAN | | | |V3R1
6529 File Server, 64MB 2 Port LAN | | | |V3R1
6602 Single DASD Unit (1.031GB) | | | |V2R3
6603 Single DASD Unit (1967MB) | | | |V2R3
6612 Dual DASD Unit (2.062GB) | | | |V2R3
6613 Dual DASD Unit (3934MB) | | | |V2R3
6616 Integrated PC Server | | |MR MR MR|V3R2
6802 Single DASD Unit (1.031GB) | | | |V2R3
6812 Dual DASD Unit (2.062GB) | | | |V2R3
7100 Expansion Unit | MR| MR MR|SR SR SR|V1R1
7110 Expansion Unit - D Models | | |MR MR MR|V2R1
7120 Expansion Unit - E Models | | | |V2R1.1
7201 Dual Disk Install-Sys Unit |M M |M M M |M M |V1R3
7202 Dual Disk Install-Exp Unit | MR| MR MR|MR MR MR|V1R3
7203 Storage Expansion Unit | | | MR|V2R1
7348 1.2GB 1/4-in Cart Tape | | | M |V2R1.1
7349 2.5GB 1/4-in Cart Tape | | | MR|V3R0.5
7613 Base DASD Replace (3934MB) | | | |V2R3
8054 LocalTalk Workstation CONTR | | | MR|V2R3
8123 Dual DASD Unit (1976MB) | | | |V2R1.1
8347 525MB 1/4-in Cartridge Tape |M M |M M M |M M MR|V2R1
8348 1.2GB 1/4-in Cart Tape | | | |V2R1.1
8349 2.5GB 1/4-in Cart Tape | | | |V3R0.5
8612 Opt Base Disk Unit (2.062GB) | | | |V2R3
8613 Opt Base Disk Unit (3934MB) | | | |V2R3
Order Support Codes
-------------------
S - Supported (Load in price file and withdraw on same day)
P - Plant install only
M - MES install only
B - Both Plant and MES install
* - Cable
R - Removal Price released
The following feature exchanges are available
for the 9404. In the U.S., one-for-one feature exchanges are generally ordered
as MES Feature Conversions. Many-for-one (i.e., two-for-one, three-for-one)
feature exchanges are ordered as MES Feature Group Exchanges. In countries
other than the U.S., feature exchanges are ordered by feature codes.
(Non-U.S.) Feature Description Codes --------------------------------------------------- ---- Exchange one #4104 for one #3108 3070(For IBM US, No Longer Available as of July 31, 1996)
Exchange two #4104 for one #3120 3800 Exchange one #4104 for one #3120 3801 Exchange one #4104 for one #3121 3802 Exchange one #4104 for one #3122 3803 Exchange one #3108 for one #3120 3804 Exchange one #3108 for one #3121 3805 Exchange one #3108 for one #3122 3806 Exchange one #4114 for one #3120 3807 Exchange one #4114 for one #3121 3808 Exchange one #4114 for one #3122 3809 Exchange one #4104 and one #4114 for one #3120 3810 Exchange one #4104 and one #4114 for one #3121 3811 Exchange one #4104 and one #4114 for one #3122 3812 Exchange two #4114 for one #3120 3813 Exchange two #4114 for one #3121 3814 Exchange two #4114 for one #3122 3815 Exchange one #4104 and two #4114 for one #3122 3816 Exchange two #4104 and two #4114 for one #3122 3817 Exchange two #4104 and three #4114 for one #3122 3818 Exchange two #4104 and four #4114 for one #3122 3819 Exchange one #3108 and one #4114 for one #3122 3820 Exchange one #3108 and two #4114 for one #3122 3821 Exchange two #3108 and two #4114 for one #3122 3822 Exchange two #3108 and three #4114 for one #3122 3823 Exchange two #3108 and four #4114 for one #3122 3824 Exchange one #3120 for one #3122 3825 Exchange one #3121 for one #3122 3826 Exchange one #3120 and one #3121 for one #3122 3827 Upgrade #6105 (320MB) to #6108 (640MB) 6070(For IBM US, No Longer Available as of July 31, 1996)
Upgrade #6107 (400MB) to #6121 (800MB) 6072(For IBM US, No Longer Available as of July 31, 1996)
Upgrade #6109 (988MB) to #6123 (1976MB) 6078(For IBM US, No Longer Available as of July 31, 1996)
Upgrade #9109 (988MB) to #6124 (1976MB) 6079(For IBM US, No Longer Available as of July 31, 1996)
Upgrade #6125 (988MB) to #6124 (1976MB) 6080
(For IBM US, No Longer Available as of July 31, 1996)
Upgrade #6603 (1967MB) to #6613 (3934MB) 6082(For IBM US, No Longer Available as of July 31, 1996)
Convert #6131 (5 1/4-inch Diskette) to #6137 8512(For IBM US, No Longer Available as of July 31, 1996)
Convert #6132 (8-inch Diskette) to #6138 8513(For IBM US, No Longer Available as of July 31, 1996)
Convert #7100 (Expansion Unit) to #7110 8514(For IBM US, No Longer Available as of July 31, 1996)
Convert #7100 (Expansion Unit) to #7120 8518(For IBM US, No Longer Available as of July 31, 1996)
Convert #7110 (Expansion Unit) to #7120 8519(For IBM US, No Longer Available as of July 31, 1996)
Convert #6346 (1/4-Inch Tape) to #6347 8520(For IBM US, No Longer Available as of July 31, 1996)
Convert #2600 to #2624 8521(For IBM US, No Longer Available as of July 31, 1996)
Convert #6346 (1/4-Inch Tape) to #6348 8523
(For IBM US, No Longer Available as of July 31, 1996)
P/N Description
--- -----------
2438441 Twinax Port Tester English
2438442 Twinax Port Tester Italian
2438443 Twinax Port Tester Japanese
69X7016 Async Modem Cable
21F2674 Async Modem Cable Japan
21F2671 Async Modem Cable Germany
21F4505 20ft EIA 232 Terminal/Prt
21F4342 40ft EIA 232 Terminal/Prt
21F4346 100ft EIA 232 Terminal/Prt
21F9965 20ft EIA 232 IWS
21F4403 EIA 422 Surge Suppressor
74F0360 Antenna Cable - 20 ft
74F0361 Antenna Cable - 50 ft
74F0362 Omni-Directional Antenna
74F0363 Hemispherical Directional
Antenna
74F0364 Directional
Antenna
74F0365 7208 4M Attachment Cable
74F0366 3M (9.8 ft) AUI Ethernet
Cable
74F0367 2.44M (8 ft) 802.5 Token-
Ring Cable
74F0369 6.1M (20ft)
CCITT X.21
74F0370 6.1M (20ft) CCITT V.35 cable
74F0371 24.2M (80ft) CCITT V.35 cable
74F0372 6.1M (20ft) CCITT V.36/EIA RS449 cable
74F0373 24.2M (80ft) CCITT V.36/EIA RS449 cable
74F0374 45.7M (150ft) CCITT V.36/EIA RS449 cable
74F0381 20m (65.6 ft) Optical Cable
74F0382 EIA 232/V.24 E 20ft
74F0383 EIA 232/V.24 E 20ft Japan
74F0384 EIA 232/V.24 E 20ft Germany
74F0385 EIA 232/V.24 20ft
74F0386 EIA 232/V.24 20ft Japan
74F0387 EIA 232/V.24 20ft Germany
74F0388 X.21 20ft
74F0389 V.35 20ft
74F0390 RS 366
Autocall 20ft
74F0391 RS 366 Autocall 20ft Japan
74F0392 EIA 232/V.24 E 50ft
74F0393 EIA 232/V.24 E 50ft Japan
74F0394 EIA 232/V.24 E 50ft Germany
74F0395 EIA 232/V.24 50ft
74F0396 EIA 232/V.24 50ft Japan
74F0397 EIA 232/V.24 50ft Germany
74F0398 X.21 50ft
74F0399 V.35 50ft
74F1825 EIA 232/V.24 E 80ft
17G2577 EIA 232/V.24 E 80ft Japan
17G2578 EIA 232/V.24 E 80ft Germany
74F1827 V.35 80ft
Note: Order accessories via MSORDER (Category =
Accessories/Supplies,
Machine Type =
9404 and by the part number.)
Not available.
Not available.
Tape Cartridges:
·
The 120MB 1/4-Inch
Cartridge Tape Unit uses the IBM 6150 Data Cartridge (120MB), part number
21F8588 or equivalent.
Note: 8mm data
cartridge media must meet the proposed American National Standards Institute
(ANSI) standard X3B5/89-136, Unrecorded Magnetic Tape Cartridge for Information
Exchange.
Cleaning Cartridges and Kits:
·
The 120MB and 525MB
1/4-Inch Cartridge Tape Units use the IBM .25-Inch Cleaning Cartridge Kit, part
number 16G8572 or equivalent.
o
Note: This Cleaning
Cartridge will NOT work in the 120MB or 525MB Tape Units.
The diskette units utilize the following IBM
or equivalent diskette media:
8-inch diskettes:
·
IBM Diskette 1
o
P/N 2305830 128
Bytes/Sector
5 1/4-inch diskettes:
·
IBM Diskette 2HC
o
P/N 6109660 80
Track/Double Sided
·
8mm Data Cartridge media,
8mm Cleaning Cartridges and Diskette media supplies can be purchased from IBM
Authorized Supplies Dealers, IBM Authorized Distributors or from IBM Direct
through the following phone number:
o
888-426-6334.
(R), (TM), * Trademark or registered trademark
of International Business Machines Corporation.
** Company, product, or service name may be a
trademark or service mark of others.
Windows is a trademark of Microsoft
Corporation.
UNIX is a registered trademark in the United
States and other countries licensed exclusively through X/Open Company Limited.